Post Stock Login Register

GOST 4543 35HM vs SAE J404 4137

Close Alternative — 81.5% match based on chemical composition and mechanical property overlap.

GOST 4543 35HM (GOST 4543-2016) and SAE J404 4137 (SAE J404:2009) are both steel grades. Both fall under the Alloy Steel category. GOST 4543 35HM is typically used for used for shafts, gears, connecting rods, bolts, and pressure equipment parts., while SAE J404 4137 is commonly used for chemistry-only alloy steel grade; see the composition notes for product scope. SAE J404 4137 is defined under SAE International (United States).

As per chemical composition, GOST 4543 35HM vs SAE J404 4137 is a 81.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 81.5%.

Frequently Compared With GOST 4543 35HM:
NF A35-565 100C6 UNI 11234 100Cr6 GOST 4543 12HN3A GB/T 3077 12Cr2Ni4A IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 105Cr5 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 10Cr9Mo10
Match Breakdown
CHEMISTRY MATCH
81.5%
MECHANICAL MATCH
No shared data
OVERALL
81.5%
Specifications
Property GOST 4543 35HM SAE J404 4137
Standard GOST 4543-2016 SAE J404:2009
Category Alloy Steel Alloy Steel
C (%) 0.32-0.39 0.35-0.40
Cr (%) 0.9-1.2 0.80-1.10
Mo (%) 0.15-0.3 0.15-0.25
Mn (%) 0.5-0.8 0.70-0.90
Si (%) 0.17-0.37 0.15-0.35
P (%) Not specified <=0.030
S (%) Not specified <=0.040
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GOST 4543 35HM SAE J404 4137
Tensile Strength 850-1000 MPa Not specified
Yield Strength 685 MPa min Not specified
Elongation 12% min Not specified
Hardness 241-302 HB Not specified
Typical Applications
GOST 4543 35HM
Used for shafts, gears, connecting rods, bolts, and pressure equipment parts.
SAE J404 4137
Chemistry-only alloy steel grade; see the composition notes for product scope
Key Differences
Can GOST 4543 35HM Be Substituted With SAE J404 4137?
GOST 4543 35HM and SAE J404 4137 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
Forms & Sizes Available on M-EX
GOST 4543 35HM
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 6400–6400 mm (251.97–251.97 in)
SAE J404 4137
No active listings currently.
On M-EX Right Now
GOST 4543 35HM
2 active listings and RFQs →
SAE J404 4137
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GOST 4543 35HM and SAE J404 4137?
SAE J404 4137 specifies P, S which are not specified for GOST 4543 35HM.
Can GOST 4543 35HM be substituted with SAE J404 4137?
GOST 4543 35HM and SAE J404 4137 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.