Post Stock Login Register

GOST 4543 40HFA vs IS 1570 (Part 4) 50Cr4V2

Close Alternative — 81% match based on chemical composition and mechanical property overlap.

GOST 4543 40HFA (GOST 4543-2016) and IS 1570 (Part 4) 50Cr4V2 (IS 1570 (Part 4):1988) are both steel grades. Both fall under the Alloy Steel category. IS 1570 (Part 4) 50Cr4V2 is defined under Bureau of Indian Standards (IS) (India).

As per chemical composition, GOST 4543 40HFA vs IS 1570 (Part 4) 50Cr4V2 is a 81% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 81%.

Frequently Compared With GOST 4543 40HFA:
NF A35-565 100C6 UNI 11234 100Cr6 GOST 4543 12HN3A GB/T 3077 12Cr2Ni4A IS 4367 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 10Cr9Mo10
Match Breakdown
CHEMISTRY MATCH
81%
MECHANICAL MATCH
No shared data
OVERALL
81%
Specifications
Property GOST 4543 40HFA IS 1570 (Part 4) 50Cr4V2
Standard GOST 4543-2016 IS 1570 (Part 4):1988
Category Alloy Steel Alloy Steel
C (%) 0.37-0.44 0.45-0.55
Cr (%) 0.8-1.1 0.90-1.20
V (%) 0.1-0.2 0.15-0.30
Mn (%) 0.5-0.8 0.50-0.80
Si (%) 0.17-0.37 0.10-0.35
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GOST 4543 40HFA IS 1570 (Part 4) 50Cr4V2
Tensile Strength 950-1150 MPa Not specified
Yield Strength 785 MPa min Not specified
Elongation 11% min Not specified
Hardness 269-331 HB Not specified
Typical Applications
GOST 4543 40HFA
Used for springs, shafts, gears, fasteners, and aircraft structural components.
IS 1570 (Part 4) 50Cr4V2
Not documented
Can GOST 4543 40HFA Be Substituted With IS 1570 (Part 4) 50Cr4V2?
GOST 4543 40HFA and IS 1570 (Part 4) 50Cr4V2 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
Forms & Sizes Available on M-EX
GOST 4543 40HFA
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 6500–6600 mm (255.91–259.84 in)
IS 1570 (Part 4) 50Cr4V2
No active listings currently.
On M-EX Right Now
GOST 4543 40HFA
2 active listings and RFQs →
IS 1570 (Part 4) 50Cr4V2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GOST 4543 40HFA and IS 1570 (Part 4) 50Cr4V2?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can GOST 4543 40HFA be substituted with IS 1570 (Part 4) 50Cr4V2?
GOST 4543 40HFA and IS 1570 (Part 4) 50Cr4V2 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.