Post Stock Login Register

IS 11169 (Part 1) 20C15 vs SAE J403 1524

Strong Match — 87.9% match based on chemical composition and mechanical property overlap.

IS 11169 (Part 1) 20C15 (IS 11169 (Part 1):1984) and SAE J403 1524 (SAE J403:2009) are both steel grades. Both fall under the Carbon Steel category. IS 11169 (Part 1) 20C15 is typically used for cold heading and cold extrusion; the standard covers wires, wire rods and bars of 2 to 100 mm diameter (clause 1.1), while SAE J403 1524 is commonly used for chemistry-only grade; product scope as listed in the composition notes. IS 11169 (Part 1) 20C15 is defined under Bureau of Indian Standards (IS), originating from India, while SAE J403 1524 is defined under SAE International, originating from United States.

As per chemical composition, IS 11169 (Part 1) 20C15 vs SAE J403 1524 is a 87.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 87.9%.

Frequently Compared With IS 11169 (Part 1) 20C15:
BS 970 (Part 1) 040A10 BS 970 (Part 3) 070M55 BS 970 (Part 3) 045A10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 3) 070M20 BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A12 BS 970 (Part 1) 055M15 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045M10
Match Breakdown
CHEMISTRY MATCH
87.9%
MECHANICAL MATCH
No shared data
OVERALL
87.9%
Specifications
Property IS 11169 (Part 1) 20C15 SAE J403 1524
Standard IS 11169 (Part 1):1984 SAE J403:2009
Category Carbon Steel Carbon Steel
C (%) 0.16-0.24 0.19-0.25
Mn (%) 1.30-1.70 1.35-1.65
Si (%) 0.10-0.35 Not specified
P (%) Not specified <=0.030
S (%) Not specified <=0.050
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 11169 (Part 1) 20C15 SAE J403 1524
Hardness, annealed <=170 HB Not specified
Typical Applications
IS 11169 (Part 1) 20C15
Cold heading and cold extrusion; the standard covers wires, wire rods and bars of 2 to 100 mm diameter (clause 1.1)
SAE J403 1524
Chemistry-only grade; product scope as listed in the composition notes
Key Differences
Can IS 11169 (Part 1) 20C15 Be Substituted With SAE J403 1524?
IS 11169 (Part 1) 20C15 and SAE J403 1524 overlap closely enough on chemistry and mechanical properties that SAE J403 1524 is often considered as a substitute for IS 11169 (Part 1) 20C15 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 11169 (Part 1) 20C15
0 active listings and RFQs →
SAE J403 1524
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 11169 (Part 1) 20C15 and SAE J403 1524?
IS 11169 (Part 1) 20C15 specifies Si which is not specified for SAE J403 1524. SAE J403 1524 specifies P, S which are not specified for IS 11169 (Part 1) 20C15.
Can IS 11169 (Part 1) 20C15 be substituted with SAE J403 1524?
IS 11169 (Part 1) 20C15 and SAE J403 1524 overlap closely enough on chemistry and mechanical properties that SAE J403 1524 is often considered as a substitute for IS 11169 (Part 1) 20C15 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.