Post Stock Login Register

IS 11169 (Part 1) 25C4 vs IS 1570 (Part 2/Sec 1) 25C4

Strong Match — 100% match based on chemical composition and mechanical property overlap.

IS 11169 (Part 1) 25C4 (IS 11169 (Part 1):1984) and IS 1570 (Part 2/Sec 1) 25C4 (IS 1570 (Part 2/Sec 1):1979) are both steel grades. Both fall under the Carbon Steel category. IS 11169 (Part 1) 25C4 is defined under Bureau of Indian Standards (IS), originating from India, while IS 1570 (Part 2/Sec 1) 25C4 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 11169 (Part 1) 25C4 vs IS 1570 (Part 2/Sec 1) 25C4 is a 100% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 100%.

Frequently Compared With IS 11169 (Part 1) 25C4:
BS 970 (Part 1) 040A10 BS 970 (Part 3) 070M55 BS 970 (Part 3) 045M10 BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 060A32 BS 970 (Part 1) 055M15
Match Breakdown
CHEMISTRY MATCH
100%
MECHANICAL MATCH
No shared data
OVERALL
100%
Specifications
Property IS 11169 (Part 1) 25C4 IS 1570 (Part 2/Sec 1) 25C4
Standard IS 11169 (Part 1):1984 IS 1570 (Part 2/Sec 1):1979
Category Carbon Steel Carbon Steel
C (%) 0.20-0.30 0.20-0.30
Mn (%) 0.30-0.60 0.30-0.60
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 11169 (Part 1) 25C4 IS 1570 (Part 2/Sec 1) 25C4
Hardness, annealed <=150 HB Not specified
Tensile Strength Not specified 440-540 MPa
Elongation Not specified >=23%
Typical Applications
IS 11169 (Part 1) 25C4
Cold heading and cold extrusion; the standard covers wires, wire rods and bars of 2 to 100 mm diameter (clause 1.1)
IS 1570 (Part 2/Sec 1) 25C4
Not documented
Can IS 11169 (Part 1) 25C4 Be Substituted With IS 1570 (Part 2/Sec 1) 25C4?
IS 11169 (Part 1) 25C4 and IS 1570 (Part 2/Sec 1) 25C4 overlap closely enough on chemistry and mechanical properties that IS 1570 (Part 2/Sec 1) 25C4 is often considered as a substitute for IS 11169 (Part 1) 25C4 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 11169 (Part 1) 25C4
0 active listings and RFQs →
IS 1570 (Part 2/Sec 1) 25C4
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 11169 (Part 1) 25C4 and IS 1570 (Part 2/Sec 1) 25C4?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 11169 (Part 1) 25C4 be substituted with IS 1570 (Part 2/Sec 1) 25C4?
IS 11169 (Part 1) 25C4 and IS 1570 (Part 2/Sec 1) 25C4 overlap closely enough on chemistry and mechanical properties that IS 1570 (Part 2/Sec 1) 25C4 is often considered as a substitute for IS 11169 (Part 1) 25C4 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.