Post Stock Login Register

IS 11169 (Part 1) 27C15 vs BS 970 (Part 1) 060A32

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

IS 11169 (Part 1) 27C15 (IS 11169 (Part 1):1984) and BS 970 (Part 1) 060A32 (BS 970 (Part 1):1983) are both steel grades. Both fall under the Carbon Steel category. IS 11169 (Part 1) 27C15 is typically used for manganese case-hardening steel; used for gears, shafts, and machine components requiring case hardening where higher core strength than plain carbon grades is needed, while BS 970 (Part 1) 060A32 is commonly used for through hardening steel for mechanical and allied engineering purposes; supplied in the hardened and tempered conditions of table 6.. IS 11169 (Part 1) 27C15 is defined under Bureau of Indian Standards (IS), originating from India, while BS 970 (Part 1) 060A32 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, IS 11169 (Part 1) 27C15 vs BS 970 (Part 1) 060A32 is a 81.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With IS 11169 (Part 1) 27C15:
BS 970 (Part 1) 040A10 BS 970 (Part 3) 070M55 BS 970 (Part 1) 080A20 BS 970 (Part 3) 045M10 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045M10
Match Breakdown
CHEMISTRY MATCH
81.3%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property IS 11169 (Part 1) 27C15 BS 970 (Part 1) 060A32
Standard IS 11169 (Part 1):1984 BS 970 (Part 1):1983
Category Carbon Steel Carbon Steel
C (%) 0.22-0.32 0.30-0.35
Mn (%) 1.30-1.70 0.50-0.70
Si (%) 0.10-0.35 Not specified
P (%) Not specified <=0.050
S (%) Not specified <=0.050
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 11169 (Part 1) 27C15 BS 970 (Part 1) 060A32
Hardness, annealed <=190 HB Not specified
Typical Applications
IS 11169 (Part 1) 27C15
Manganese case-hardening steel; used for gears, shafts, and machine components requiring case hardening where higher core strength than plain carbon grades is needed
BS 970 (Part 1) 060A32
Through hardening steel for mechanical and allied engineering purposes; supplied in the hardened and tempered conditions of Table 6.
Key Differences
Can IS 11169 (Part 1) 27C15 Be Substituted With BS 970 (Part 1) 060A32?
IS 11169 (Part 1) 27C15 and BS 970 (Part 1) 060A32 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
IS 11169 (Part 1) 27C15
Round Bar → (2 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 5600–5700 mm (220.47–224.41 in)
BS 970 (Part 1) 060A32
No active listings currently.
On M-EX Right Now
IS 11169 (Part 1) 27C15
2 active listings and RFQs →
BS 970 (Part 1) 060A32
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 11169 (Part 1) 27C15 and BS 970 (Part 1) 060A32?
IS 11169 (Part 1) 27C15 specifies Si which is not specified for BS 970 (Part 1) 060A32. BS 970 (Part 1) 060A32 specifies P, S which are not specified for IS 11169 (Part 1) 27C15.
Can IS 11169 (Part 1) 27C15 be substituted with BS 970 (Part 1) 060A32?
IS 11169 (Part 1) 27C15 and BS 970 (Part 1) 060A32 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.