Post Stock Login Register

IS 11169 (Part 1) 15Ni5Cr4Mo1 vs BS 970 EN353

Strong Match — 87.6% match based on chemical composition and mechanical property overlap.

IS 11169 (Part 1) 15Ni5Cr4Mo1 (IS 11169 (Part 1):2022) and BS 970 EN353 (BS 970:1955) are both steel grades. Both fall under the Alloy Steel category. IS 11169 (Part 1) 15Ni5Cr4Mo1 is typically used for cold heading and cold extrusion of parts that are case hardened; the standard covers bars, wire rods and wires of 2 to 100 mm (clause 1.1, annex b), while BS 970 EN353 is commonly used for heavily loaded gears, cams, camshafts. IS 11169 (Part 1) 15Ni5Cr4Mo1 is defined under Bureau of Indian Standards (IS), originating from India, while BS 970 EN353 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, IS 11169 (Part 1) 15Ni5Cr4Mo1 vs BS 970 EN353 is a 87.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 87.6%.

Frequently Compared With IS 11169 (Part 1) 15Ni5Cr4Mo1:
IS 1570 (Part 4) 103Cr6 NF A35-565 100C6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 10Mo6 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 UNI 11234 100Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 7) 10Mo6H IS 11169 (Part 1) 10Ni5Cr4 IS 1570 (Part 4) 10Cr20Mo6
Match Breakdown
CHEMISTRY MATCH
87.6%
MECHANICAL MATCH
No shared data
OVERALL
87.6%
Specifications
Property IS 11169 (Part 1) 15Ni5Cr4Mo1 BS 970 EN353
Standard IS 11169 (Part 1):2022 BS 970:1955
Category Alloy Steel Alloy Steel
C (%) 0.12-0.18 <=0.20
Cr (%) 0.75-1.25 0.75-1.25
Cu (%) <=0.15 Not specified
Mn (%) 0.60-1.00 0.50-1.00
Mo (%) 0.08-0.15 0.08-0.15
Ni (%) 1.00-1.50 1.00-1.50
P (%) <=0.035 <=0.050
S (%) <=0.035 <=0.050
Si (%) 0.10-0.35 <=0.35
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 11169 (Part 1) 15Ni5Cr4Mo1 BS 970 EN353
Hardness, annealed (+AC) <=180 HBW Not specified
Tensile Strength Not specified ≥1004 MPa (65 tons/sq in, converted)
Elongation Not specified ≥12%
Condition Not specified core, min (lowest-strength condition of the standard)
Typical Applications
IS 11169 (Part 1) 15Ni5Cr4Mo1
Cold heading and cold extrusion of parts that are case hardened; the standard covers bars, wire rods and wires of 2 to 100 mm (clause 1.1, Annex B)
BS 970 EN353
Heavily loaded gears, cams, camshafts
Key Differences
Can IS 11169 (Part 1) 15Ni5Cr4Mo1 Be Substituted With BS 970 EN353?
IS 11169 (Part 1) 15Ni5Cr4Mo1 and BS 970 EN353 overlap closely enough on chemistry and mechanical properties that BS 970 EN353 is often considered as a substitute for IS 11169 (Part 1) 15Ni5Cr4Mo1 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
IS 11169 (Part 1) 15Ni5Cr4Mo1
No active listings currently.
BS 970 EN353
Round Bar → (3 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5200–6300 mm (204.72–248.03 in)
On M-EX Right Now
IS 11169 (Part 1) 15Ni5Cr4Mo1
0 active listings and RFQs →
BS 970 EN353
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 11169 (Part 1) 15Ni5Cr4Mo1 and BS 970 EN353?
IS 11169 (Part 1) 15Ni5Cr4Mo1 specifies Cu which is not specified for BS 970 EN353.
Can IS 11169 (Part 1) 15Ni5Cr4Mo1 be substituted with BS 970 EN353?
IS 11169 (Part 1) 15Ni5Cr4Mo1 and BS 970 EN353 overlap closely enough on chemistry and mechanical properties that BS 970 EN353 is often considered as a substitute for IS 11169 (Part 1) 15Ni5Cr4Mo1 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.