Post Stock Login Register

IS 11169 (Part 1) 20C15 vs IS 11169 (Part 1) 40C8

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

IS 11169 (Part 1) 20C15 (IS 11169 (Part 1):2022) and IS 11169 (Part 1) 40C8 (IS 11169 (Part 1):2022) are both steel grades. Both fall under the Carbon Steel category. IS 11169 (Part 1) 20C15 is typically used for cold heading and cold extrusion of parts that are quenched and tempered; the standard covers bars, wire rods and wires of 2 to 100 mm (clause 1.1, annex c), while IS 11169 (Part 1) 40C8 is commonly used for cold heading and cold extrusion of parts that are quenched and tempered; the standard covers bars, wire rods and wires of 2 to 100 mm (clause 1.1, annex c). IS 11169 (Part 1) 20C15 is defined under Bureau of Indian Standards (IS), originating from India, while IS 11169 (Part 1) 40C8 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 11169 (Part 1) 20C15 vs IS 11169 (Part 1) 40C8 is a 85.7% match. As per mechanical properties, the match is 100%. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With IS 11169 (Part 1) 20C15:
BS 970 (Part 1) 040A10 BS 970 (Part 3) 070M55 BS 970 (Part 3) 045M10 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045M10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 060A32 BS 970 (Part 1) 040A04 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10
Match Breakdown
CHEMISTRY MATCH
85.7%
MECHANICAL MATCH
100%
OVERALL
69.9%
Specifications
Property IS 11169 (Part 1) 20C15 IS 11169 (Part 1) 40C8
Standard IS 11169 (Part 1):2022 IS 11169 (Part 1):2022
Category Carbon Steel Carbon Steel
C (%) 0.16-0.24 0.35-0.45
Cr (%) <=0.15 <=0.15
Cu (%) <=0.15 <=0.15
Mn (%) 1.30-1.70 0.60-0.90
Mo (%) <=0.05 <=0.05
Ni (%) <=0.15 <=0.15
P (%) <=0.035 <=0.035
S (%) <=0.035 <=0.035
Si (%) 0.10-0.35 0.10-0.35
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 11169 (Part 1) 20C15 IS 11169 (Part 1) 40C8
Hardness, annealed (+AC) <=170 HBW <=170 HBW
Core Hardness (CH) Not specified >=40 HRC up to 11 mm
Typical Applications
IS 11169 (Part 1) 20C15
Cold heading and cold extrusion of parts that are quenched and tempered; the standard covers bars, wire rods and wires of 2 to 100 mm (clause 1.1, Annex C)
IS 11169 (Part 1) 40C8
Cold heading and cold extrusion of parts that are quenched and tempered; the standard covers bars, wire rods and wires of 2 to 100 mm (clause 1.1, Annex C)
Can IS 11169 (Part 1) 20C15 Be Substituted With IS 11169 (Part 1) 40C8?
IS 11169 (Part 1) 20C15 and IS 11169 (Part 1) 40C8 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 11169 (Part 1) 20C15
0 active listings and RFQs →
IS 11169 (Part 1) 40C8
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 11169 (Part 1) 20C15 and IS 11169 (Part 1) 40C8?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 11169 (Part 1) 20C15 be substituted with IS 11169 (Part 1) 40C8?
IS 11169 (Part 1) 20C15 and IS 11169 (Part 1) 40C8 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.