IS 11169 (Part 1):2022 20C4GC Steel: Specifications & Listings

IS 11169 (Part 1):2022 20C4GC: Cold heading quality non-alloy case hardening steel 20C4GC to IS 11169 (Part 1):2022, for parts case hardened after cold heading or cold extrusion, supplied as wire rod, bars or wire of 2 to 100 mm. Maximum tensile strength as hot rolled is 530 MPa.

Category: Carbon Steel
Grade Details
GradeIS 11169 (Part 1):2022 20C4GC
Standard IS 11169 (Part 1):2022
ApplicationsCold heading and cold extrusion of parts that are case hardened; the standard covers bars, wire rods and wires of 2 to 100 mm (clause 1.1, Annex B)
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
ISO C20E2C ISO 4954 International Not yet on M-EX
EN C20E2C (1.1152) EN 10263 Europe Not yet on M-EX
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
IS 11169 (Part 1) 17C8GC (case hardening) IS 11169 (Part 1):2022 Strong Match
SAE J403 1020 SAE J403:2001 Strong Match
SAE J403 1020 SAE J403:2009 Strong Match
SAE J403 1020 SAE J403:2014 Strong Match
EN 10084 C10E EN 10084:2008 Strong Match
EN 10084 C15E EN 10084:2008 Strong Match
JIS G4051 S35C JIS G4051:2009 Close Alternative
SAE J403 1017 SAE J403:2001 Close Alternative
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Cu Mn P S Si
0.18-0.22 <=0.25 0.30-0.60 <=0.025 <=0.025 <=0.30
Mechanical Properties
Tensile Strength, as rolled (+AR) <=530 MPa (over 5 to 100 mm)

More data from IS 11169 (Part 1):2022

From the standard
Other composition limits from the table notes and clauses
Values
Maximum unless a range is given (ladle analysis)
Deoxidation
Aluminium killed (clause 6.2)
Elements not listed are not added intentionally without the purchaser's agreement, except those used to finish the heat.
Source: IS 11169 (Part 1):2022, Table B.2 and its notes, clause 6.2
Tensile strength and reduction of area by delivery condition by delivery condition and size
Delivery conditionDiameter (mm)Tensile strength, max (MPa)Reduction of area, min (%)
+AR or +PEover 5 to 1053058
+AR or +PEover 10 to 4053058
+AR or +PEover 40 to 10053058
+AC or +AC+PEover 5 to 1047065
+AC or +AC+PEover 10 to 4047065
+AC or +AC+PEover 40 to 10047065
+AR+Cover 5 to 1064056
+AR+Cover 10 to 4063056
+AR+C+AC2 (incl.) to 546067
+AR+C+ACover 5 to 1045067
+AR+C+ACover 10 to 4045067
+AR+C+AC+LC2 (incl.) to 550065
+AR+C+AC+LCover 5 to 1049065
+AR+C+AC+LCover 10 to 4049065
+AC+Cover 5 to 1058062
+AC+Cover 10 to 4057062
Codes: +AR as hot rolled, +PE peeled, +C cold drawn, +AC annealed to spheroidized carbides, +LC skin passed. For non-circular sections the properties are agreed between manufacturer and purchaser. Reduction of area values in the as rolled condition are for information only.
Source: IS 11169 (Part 1):2022, Table B.3

Active IS 11169 (Part 1):2022 20C4GC Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active IS 11169 (Part 1):2022 20C4GC listings at this time.

Register for Alerts

Buyer RFQs for IS 11169 (Part 1):2022 20C4GC

+ Post an RFQ for this grade

No open buyer requirements for IS 11169 (Part 1):2022 20C4GC at this time.

Register for Alerts