Post Stock Login Register

IS 11169 (Part 1) 20Mo5Cr2S3 vs IS 11169 (Part 1) 20Mo5Cr2

Strong Match — 98.3% match based on chemical composition and mechanical property overlap.

IS 11169 (Part 1) 20Mo5Cr2S3 (IS 11169 (Part 1):2022) and IS 11169 (Part 1) 20Mo5Cr2 (IS 11169 (Part 1):2022) are both steel grades. Both fall under the Alloy Steel category. IS 11169 (Part 1) 20Mo5Cr2S3 is typically used for cold heading and cold extrusion of parts that are case hardened; the standard covers bars, wire rods and wires of 2 to 100 mm (clause 1.1, annex b), while IS 11169 (Part 1) 20Mo5Cr2 is commonly used for cold heading and cold extrusion of parts that are case hardened; the standard covers bars, wire rods and wires of 2 to 100 mm (clause 1.1, annex b). IS 11169 (Part 1) 20Mo5Cr2S3 is defined under Bureau of Indian Standards (IS), originating from India, while IS 11169 (Part 1) 20Mo5Cr2 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 11169 (Part 1) 20Mo5Cr2S3 vs IS 11169 (Part 1) 20Mo5Cr2 is a 97.5% match. As per mechanical properties, the match is 100%. Combined, this makes them a strong match overall at 98.3%.

Frequently Compared With IS 11169 (Part 1) 20Mo5Cr2S3:
NF A35-565 100C6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 7) 10Mo6H IS 1570 (Part 4) 07Cr4Mo6 UNI 11234 100Cr6 IS 4367 10Cr9Mo10 IS 11169 (Part 1) 12Cr4Mo2 IS 1570 (Part 4) 10Mo6 IS 4367 07Cr4Mo6 IS 1570 (Part 7) 10Cr36Mo10H
Match Breakdown
CHEMISTRY MATCH
97.5%
MECHANICAL MATCH
100%
OVERALL
98.3%
Specifications
Property IS 11169 (Part 1) 20Mo5Cr2S3 IS 11169 (Part 1) 20Mo5Cr2
Standard IS 11169 (Part 1):2022 IS 11169 (Part 1):2022
Category Alloy Steel Alloy Steel
C (%) 0.17-0.23 0.17-0.23
Cr (%) 0.30-0.60 0.30-0.60
Cu (%) <=0.25 <=0.25
Mn (%) 0.70-1.00 0.70-1.00
Mo (%) 0.40-0.50 0.40-0.50
P (%) <=0.025 <=0.025
S (%) 0.020-0.040 <=0.025
Si (%) <=0.30 <=0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 11169 (Part 1) 20Mo5Cr2S3 IS 11169 (Part 1) 20Mo5Cr2
Hardness, ferrite-pearlite (+FP) 140-187 HB 140-187 HB
Tensile Strength, annealed (+AC) <=560 MPa (over 5 to 40 mm) <=560 MPa (over 5 to 40 mm)
Typical Applications
IS 11169 (Part 1) 20Mo5Cr2S3
Cold heading and cold extrusion of parts that are case hardened; the standard covers bars, wire rods and wires of 2 to 100 mm (clause 1.1, Annex B)
IS 11169 (Part 1) 20Mo5Cr2
Cold heading and cold extrusion of parts that are case hardened; the standard covers bars, wire rods and wires of 2 to 100 mm (clause 1.1, Annex B)
Can IS 11169 (Part 1) 20Mo5Cr2S3 Be Substituted With IS 11169 (Part 1) 20Mo5Cr2?
IS 11169 (Part 1) 20Mo5Cr2S3 and IS 11169 (Part 1) 20Mo5Cr2 overlap closely enough on chemistry and mechanical properties that IS 11169 (Part 1) 20Mo5Cr2 is often considered as a substitute for IS 11169 (Part 1) 20Mo5Cr2S3 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 11169 (Part 1) 20Mo5Cr2S3
0 active listings and RFQs →
IS 11169 (Part 1) 20Mo5Cr2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 11169 (Part 1) 20Mo5Cr2S3 and IS 11169 (Part 1) 20Mo5Cr2?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 11169 (Part 1) 20Mo5Cr2S3 be substituted with IS 11169 (Part 1) 20Mo5Cr2?
IS 11169 (Part 1) 20Mo5Cr2S3 and IS 11169 (Part 1) 20Mo5Cr2 overlap closely enough on chemistry and mechanical properties that IS 11169 (Part 1) 20Mo5Cr2 is often considered as a substitute for IS 11169 (Part 1) 20Mo5Cr2S3 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.