Post Stock Login Register

IS 11169 (Part 1) 20Ni2Cr2Mo3 vs SAE J404 8720

Strong Match — 97.6% match based on chemical composition and mechanical property overlap.

IS 11169 (Part 1) 20Ni2Cr2Mo3 (IS 11169 (Part 1):2022) and SAE J404 8720 (SAE J404:2000) are both steel grades. Both fall under the Alloy Steel category. IS 11169 (Part 1) 20Ni2Cr2Mo3 is typically used for cold heading and cold extrusion of parts that are case hardened; the standard covers bars, wire rods and wires of 2 to 100 mm (clause 1.1, annex b), while SAE J404 8720 is commonly used for chemistry-only alloy steel grade; see the composition notes for product scope. IS 11169 (Part 1) 20Ni2Cr2Mo3 is defined under Bureau of Indian Standards (IS), originating from India, while SAE J404 8720 is defined under SAE International, originating from United States.

As per chemical composition, IS 11169 (Part 1) 20Ni2Cr2Mo3 vs SAE J404 8720 is a 97.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 97.6%.

Frequently Compared With IS 11169 (Part 1) 20Ni2Cr2Mo3:
NF A35-565 100C6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 4) 10Mo6 IS 1570 (Part 7) 10Mo6H IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 UNI 11234 100Cr6 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 10Cr9Mo10
Match Breakdown
CHEMISTRY MATCH
97.6%
MECHANICAL MATCH
No shared data
OVERALL
97.6%
Specifications
Property IS 11169 (Part 1) 20Ni2Cr2Mo3 SAE J404 8720
Standard IS 11169 (Part 1):2022 SAE J404:2000
Category Alloy Steel Alloy Steel
C (%) 0.18-0.23 0.18-0.23
Cr (%) 0.40-0.60 0.40-0.60
Cu (%) <=0.35 Not specified
Mn (%) 0.70-0.90 0.70-0.90
Mo (%) 0.20-0.30 0.20-0.30
Ni (%) 0.40-0.70 0.40-0.70
P (%) <=0.030 <=0.030
S (%) <=0.040 <=0.040
Si (%) 0.15-0.35 0.15-0.35
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
IS 11169 (Part 1) 20Ni2Cr2Mo3
Cold heading and cold extrusion of parts that are case hardened; the standard covers bars, wire rods and wires of 2 to 100 mm (clause 1.1, Annex B)
SAE J404 8720
Chemistry-only alloy steel grade; see the composition notes for product scope
Key Differences
Can IS 11169 (Part 1) 20Ni2Cr2Mo3 Be Substituted With SAE J404 8720?
IS 11169 (Part 1) 20Ni2Cr2Mo3 and SAE J404 8720 overlap closely enough on chemistry and mechanical properties that SAE J404 8720 is often considered as a substitute for IS 11169 (Part 1) 20Ni2Cr2Mo3 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 11169 (Part 1) 20Ni2Cr2Mo3
0 active listings and RFQs →
SAE J404 8720
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 11169 (Part 1) 20Ni2Cr2Mo3 and SAE J404 8720?
IS 11169 (Part 1) 20Ni2Cr2Mo3 specifies Cu which is not specified for SAE J404 8720.
Can IS 11169 (Part 1) 20Ni2Cr2Mo3 be substituted with SAE J404 8720?
IS 11169 (Part 1) 20Ni2Cr2Mo3 and SAE J404 8720 overlap closely enough on chemistry and mechanical properties that SAE J404 8720 is often considered as a substitute for IS 11169 (Part 1) 20Ni2Cr2Mo3 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.