Post Stock Login Register

IS 11169 (Part 1) 2C3 vs ASTM A959 S30600

Related Material — 62.2% match based on chemical composition and mechanical property overlap.

IS 11169 (Part 1) 2C3 (IS 11169 (Part 1):2022) and ASTM A959 S30600 (ASTM A959:2011) are both steel grades. IS 11169 (Part 1) 2C3 is classified under Carbon Steel, while ASTM A959 S30600 is classified under Stainless Steel — a different category, which is worth noting alongside the chemistry match below. IS 11169 (Part 1) 2C3 is typically used for cold heading and cold extrusion of parts not heat treated after cold forming; the standard covers bars, wire rods and wires of 2 to 100 mm (clause 1.1, annex a), while ASTM A959 S30600 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). IS 11169 (Part 1) 2C3 is defined under Bureau of Indian Standards (IS), originating from India, while ASTM A959 S30600 is defined under ASTM International, originating from United States.

As per chemical composition, IS 11169 (Part 1) 2C3 vs ASTM A959 S30600 is a 62.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 62.2%.

Frequently Compared With IS 11169 (Part 1) 2C3:
BS 970 (Part 1) 040A10 BS 970 (Part 3) 070M55 BS 970 (Part 1) 045M10 BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 060A32 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10
Match Breakdown
CHEMISTRY MATCH
62.2%
MECHANICAL MATCH
No shared data
OVERALL
62.2%
Specifications
Property IS 11169 (Part 1) 2C3 ASTM A959 S30600
Standard IS 11169 (Part 1):2022 ASTM A959:2011
Category Carbon Steel Stainless Steel
Al (%) 0.020-0.060 Not specified
C (%) <=0.03 <=0.018
Cr (%) <=0.30 17.0-18.5
Cu (%) <=0.30 <=0.50
Mn (%) 0.20-0.40 <=2.00
Mo (%) <=0.10 <=0.20
Ni (%) <=0.30 14.0-15.5
P (%) <=0.020 <=0.020
S (%) <=0.025 <=0.020
Si (%) <=0.10 3.7-4.3
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 11169 (Part 1) 2C3 ASTM A959 S30600
Reduction of Area, as rolled (+AR) >=75% (for information) Not specified
Tensile Strength, as rolled (+AR) <=360 MPa (over 5 to 100 mm) Not specified
Typical Applications
IS 11169 (Part 1) 2C3
Cold heading and cold extrusion of parts not heat treated after cold forming; the standard covers bars, wire rods and wires of 2 to 100 mm (clause 1.1, Annex A)
ASTM A959 S30600
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can IS 11169 (Part 1) 2C3 Be Substituted With ASTM A959 S30600?
IS 11169 (Part 1) 2C3 and ASTM A959 S30600 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 11169 (Part 1) 2C3
0 active listings and RFQs →
ASTM A959 S30600
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 11169 (Part 1) 2C3 and ASTM A959 S30600?
Different category: IS 11169 (Part 1) 2C3 is Carbon Steel, ASTM A959 S30600 is Stainless Steel. IS 11169 (Part 1) 2C3 specifies Al which is not specified for ASTM A959 S30600.
Can IS 11169 (Part 1) 2C3 be substituted with ASTM A959 S30600?
IS 11169 (Part 1) 2C3 and ASTM A959 S30600 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.