Post Stock Login Register

IS 11169 (Part 1) 30C8 vs IS 1570 (Part 4) 13Ni13Cr3

Related Material — 65% match based on chemical composition and mechanical property overlap.

IS 11169 (Part 1) 30C8 (IS 11169 (Part 1):2022) and IS 1570 (Part 4) 13Ni13Cr3 (IS 1570 (Part 4):1988) are both steel grades. IS 11169 (Part 1) 30C8 is classified under Carbon Steel, while IS 1570 (Part 4) 13Ni13Cr3 is classified under Alloy Steel — a different category, which is worth noting alongside the chemistry match below. IS 11169 (Part 1) 30C8 is defined under Bureau of Indian Standards (IS), originating from India, while IS 1570 (Part 4) 13Ni13Cr3 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 11169 (Part 1) 30C8 vs IS 1570 (Part 4) 13Ni13Cr3 is a 65% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 65%.

Frequently Compared With IS 11169 (Part 1) 30C8:
BS 970 (Part 3) 070M55 BS 970 (Part 1) 040A10 BS 970 (Part 1) 040A04 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 060A67 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 040A12 BS 970 (Part 1) 055M15 BS 970 (Part 1) 060A62
Match Breakdown
CHEMISTRY MATCH
65%
MECHANICAL MATCH
No shared data
OVERALL
65%
Specifications
Property IS 11169 (Part 1) 30C8 IS 1570 (Part 4) 13Ni13Cr3
Standard IS 11169 (Part 1):2022 IS 1570 (Part 4):1988
Category Carbon Steel Alloy Steel
C (%) 0.25-0.35 0.10-0.15
Cr (%) <=0.15 0.60-1.00
Cu (%) <=0.15 Not specified
Mn (%) 0.60-0.90 0.40-0.70
Mo (%) <=0.05 Not specified
Ni (%) <=0.15 3.00-3.50
P (%) <=0.035 Not specified
S (%) <=0.035 Not specified
Si (%) 0.10-0.35 0.15-0.35
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 11169 (Part 1) 30C8 IS 1570 (Part 4) 13Ni13Cr3
Hardness, annealed (+AC) <=160 HBW Not specified
Tensile Strength Not specified >=840 MPa
Elongation Not specified >=12%
Izod Impact Not specified >=48 J
Condition Not specified Case hardening steel, refined and quenched, core properties
Typical Applications
IS 11169 (Part 1) 30C8
Cold heading and cold extrusion of parts that are quenched and tempered; the standard covers bars, wire rods and wires of 2 to 100 mm (clause 1.1, Annex C)
IS 1570 (Part 4) 13Ni13Cr3
Not documented
Key Differences
Can IS 11169 (Part 1) 30C8 Be Substituted With IS 1570 (Part 4) 13Ni13Cr3?
IS 11169 (Part 1) 30C8 and IS 1570 (Part 4) 13Ni13Cr3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 11169 (Part 1) 30C8
0 active listings and RFQs →
IS 1570 (Part 4) 13Ni13Cr3
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 11169 (Part 1) 30C8 and IS 1570 (Part 4) 13Ni13Cr3?
Different category: IS 11169 (Part 1) 30C8 is Carbon Steel, IS 1570 (Part 4) 13Ni13Cr3 is Alloy Steel. IS 11169 (Part 1) 30C8 specifies Cu, Mo, P, S which are not specified for IS 1570 (Part 4) 13Ni13Cr3.
Can IS 11169 (Part 1) 30C8 be substituted with IS 1570 (Part 4) 13Ni13Cr3?
IS 11169 (Part 1) 30C8 and IS 1570 (Part 4) 13Ni13Cr3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.