Strong Match — 87.4% match
based on chemical composition and mechanical property overlap.
IS 11169 (Part 1) 35Cr4Mo2 (IS 11169 (Part 1):2022) and GOST 4543 35XM (GOST 4543-2016) are both steel grades.
Both fall under the Alloy Steel category.
IS 11169 (Part 1) 35Cr4Mo2 is typically used for cold heading and cold extrusion of parts that are quenched and tempered; the standard covers bars, wire rods and wires of 2 to 100 mm (clause 1.1, annex c), while GOST 4543 35XM is commonly used for gears, shafts, connecting rods, turbine fasteners, forged parts, high-strength components.
IS 11169 (Part 1) 35Cr4Mo2 is defined under Bureau of Indian Standards (IS) (India).
As per chemical composition, IS 11169 (Part 1) 35Cr4Mo2 vs GOST 4543 35XM is a 87.4% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 87.4%.
Frequently Compared With IS 11169 (Part 1) 35Cr4Mo2:
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
IS 11169 (Part 1) 35Cr4Mo2
GOST 4543 35XM
Tensile Strength
Not specified
930-1080 MPa
Yield Strength
Not specified
>=735 MPa
Elongation
Not specified
>=11%
Hardness
Not specified
241-285 HB
Typical Applications
IS 11169 (Part 1) 35Cr4Mo2
Cold heading and cold extrusion of parts that are quenched and tempered; the standard covers bars, wire rods and wires of 2 to 100 mm (clause 1.1, Annex C)
Can IS 11169 (Part 1) 35Cr4Mo2 Be Substituted With GOST 4543 35XM?
IS 11169 (Part 1) 35Cr4Mo2 and GOST 4543 35XM overlap closely enough on chemistry and mechanical properties that GOST 4543 35XM is often considered as a substitute for IS 11169 (Part 1) 35Cr4Mo2 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between IS 11169 (Part 1) 35Cr4Mo2 and GOST 4543 35XM?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 11169 (Part 1) 35Cr4Mo2 be substituted with GOST 4543 35XM?
IS 11169 (Part 1) 35Cr4Mo2 and GOST 4543 35XM overlap closely enough on chemistry and mechanical properties that GOST 4543 35XM is often considered as a substitute for IS 11169 (Part 1) 35Cr4Mo2 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.