Post Stock Login Register

IS 11169 (Part 2) X04Cr19Ni10 vs BS 970 (Part 1) 304S15

Strong Match — 89.9% match based on chemical composition and mechanical property overlap.

IS 11169 (Part 2) X04Cr19Ni10 (IS 11169 (Part 2):2023) and BS 970 (Part 1) 304S15 (BS 970 (Part 1):1983) are both steel grades. Both fall under the Stainless Steel category. IS 11169 (Part 2) X04Cr19Ni10 is typically used for cold heading and cold extrusion of stainless steel parts; the standard covers wires, wire rods and bars of 0.8 to 50 mm (clause 1.1, table 11), while BS 970 (Part 1) 304S15 is commonly used for austenitic stainless and heat resisting steel for mechanical and allied engineering purposes (table 14, with table 15 for the cold drawn condition).. IS 11169 (Part 2) X04Cr19Ni10 is defined under Bureau of Indian Standards (IS), originating from India, while BS 970 (Part 1) 304S15 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, IS 11169 (Part 2) X04Cr19Ni10 vs BS 970 (Part 1) 304S15 is a 89.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 89.9%.

Frequently Compared With IS 11169 (Part 2) X04Cr19Ni10:
EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 GOST 5632 12Kh13 ASTM A959 .- GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H
Match Breakdown
CHEMISTRY MATCH
89.9%
MECHANICAL MATCH
No shared data
OVERALL
89.9%
Specifications
Property IS 11169 (Part 2) X04Cr19Ni10 BS 970 (Part 1) 304S15
Standard IS 11169 (Part 2):2023 BS 970 (Part 1):1983
Category Stainless Steel Stainless Steel
C (%) <=0.07 <=0.06
Cr (%) 17.5-19.5 17.5-19.0
Cu (%) <=1.00 Not specified
Mn (%) <=2.00 <=2.0
N (%) <=0.10 Not specified
Ni (%) 8.0-10.5 8.0-11.0
P (%) <=0.045 <=0.045
S (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.0
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 11169 (Part 2) X04Cr19Ni10 BS 970 (Part 1) 304S15
Reduction of Area, solution annealed (+AT) >=65% (over 5 to 50 mm) Not specified
Tensile Strength, solution annealed (+AT) <=650 MPa (over 5 to 50 mm) Not specified
Typical Applications
IS 11169 (Part 2) X04Cr19Ni10
Cold heading and cold extrusion of stainless steel parts; the standard covers wires, wire rods and bars of 0.8 to 50 mm (clause 1.1, Table 11)
BS 970 (Part 1) 304S15
Austenitic stainless and heat resisting steel for mechanical and allied engineering purposes (Table 14, with Table 15 for the cold drawn condition).
Key Differences
Can IS 11169 (Part 2) X04Cr19Ni10 Be Substituted With BS 970 (Part 1) 304S15?
IS 11169 (Part 2) X04Cr19Ni10 and BS 970 (Part 1) 304S15 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 304S15 is often considered as a substitute for IS 11169 (Part 2) X04Cr19Ni10 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 11169 (Part 2) X04Cr19Ni10
0 active listings and RFQs →
BS 970 (Part 1) 304S15
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 11169 (Part 2) X04Cr19Ni10 and BS 970 (Part 1) 304S15?
IS 11169 (Part 2) X04Cr19Ni10 specifies Cu, N which are not specified for BS 970 (Part 1) 304S15.
Can IS 11169 (Part 2) X04Cr19Ni10 be substituted with BS 970 (Part 1) 304S15?
IS 11169 (Part 2) X04Cr19Ni10 and BS 970 (Part 1) 304S15 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 304S15 is often considered as a substitute for IS 11169 (Part 2) X04Cr19Ni10 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.