Post Stock Login Register

IS 11169 (Part 2) X10Cr18Ni8 vs IS 11169 (Part 2) X04Cr17Ni12Mo2

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

IS 11169 (Part 2) X10Cr18Ni8 (IS 11169 (Part 2):2023) and IS 11169 (Part 2) X04Cr17Ni12Mo2 (IS 11169 (Part 2):2023) are both steel grades. Both fall under the Stainless Steel category. IS 11169 (Part 2) X10Cr18Ni8 is typically used for cold heading and cold extrusion of stainless steel parts; the standard covers wires, wire rods and bars of 0.8 to 50 mm (clause 1.1, table 11), while IS 11169 (Part 2) X04Cr17Ni12Mo2 is commonly used for cold heading and cold extrusion of stainless steel parts; the standard covers wires, wire rods and bars of 0.8 to 50 mm (clause 1.1, table 11). IS 11169 (Part 2) X10Cr18Ni8 is defined under Bureau of Indian Standards (IS), originating from India, while IS 11169 (Part 2) X04Cr17Ni12Mo2 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 11169 (Part 2) X10Cr18Ni8 vs IS 11169 (Part 2) X04Cr17Ni12Mo2 is a 69.2% match. As per mechanical properties, the match is 100%. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With IS 11169 (Part 2) X10Cr18Ni8:
IS 1570 (Part 7) 12Cr12Ni2Mo GOST 5632 12Kh13 GOST 5632 08X18H10 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr13H GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH
Match Breakdown
CHEMISTRY MATCH
69.2%
MECHANICAL MATCH
100%
OVERALL
69.9%
Specifications
Property IS 11169 (Part 2) X10Cr18Ni8 IS 11169 (Part 2) X04Cr17Ni12Mo2
Standard IS 11169 (Part 2):2023 IS 11169 (Part 2):2023
Category Stainless Steel Stainless Steel
C (%) 0.05-0.15 <=0.07
Cr (%) 16.0-19.0 16.5-18.5
Cu (%) <=1.00 <=1.00
Mn (%) <=2.00 <=2.00
Mo (%) <=0.80 2.00-3.00
N (%) <=0.10 <=0.10
Ni (%) 6.0-9.5 10.0-13.0
P (%) <=0.045 <=0.045
S (%) <=0.015 <=0.030
Si (%) <=2.00 <=1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 11169 (Part 2) X10Cr18Ni8 IS 11169 (Part 2) X04Cr17Ni12Mo2
Reduction of Area, solution annealed (+AT) >=65% (over 5 to 50 mm) >=65% (over 5 to 50 mm)
Tensile Strength, solution annealed (+AT) <=660 MPa (over 5 to 50 mm) <=660 MPa (over 5 to 50 mm)
Typical Applications
IS 11169 (Part 2) X10Cr18Ni8
Cold heading and cold extrusion of stainless steel parts; the standard covers wires, wire rods and bars of 0.8 to 50 mm (clause 1.1, Table 11)
IS 11169 (Part 2) X04Cr17Ni12Mo2
Cold heading and cold extrusion of stainless steel parts; the standard covers wires, wire rods and bars of 0.8 to 50 mm (clause 1.1, Table 11)
Can IS 11169 (Part 2) X10Cr18Ni8 Be Substituted With IS 11169 (Part 2) X04Cr17Ni12Mo2?
IS 11169 (Part 2) X10Cr18Ni8 and IS 11169 (Part 2) X04Cr17Ni12Mo2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 11169 (Part 2) X10Cr18Ni8
0 active listings and RFQs →
IS 11169 (Part 2) X04Cr17Ni12Mo2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 11169 (Part 2) X10Cr18Ni8 and IS 11169 (Part 2) X04Cr17Ni12Mo2?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 11169 (Part 2) X10Cr18Ni8 be substituted with IS 11169 (Part 2) X04Cr17Ni12Mo2?
IS 11169 (Part 2) X10Cr18Ni8 and IS 11169 (Part 2) X04Cr17Ni12Mo2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.