Post Stock Login Register

IS 1570 (Part 2/Sec 1) 5C4 vs BS 970 EN2A/1

Strong Match — 98.9% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 2/Sec 1) 5C4 (IS 1570 (Part 2/Sec 1):1979) and BS 970 EN2A/1 (BS 970:1955) are both steel grades. Both fall under the Carbon Steel category. IS 1570 (Part 2/Sec 1) 5C4 is typically used for rivet wire for the bearing industry and bearing cage strip (the standard links this grade to is 4882, is 4397), while BS 970 EN2A/1 is commonly used for bars and billets for forging; forgings and drop-forgings; bars for machining. IS 1570 (Part 2/Sec 1) 5C4 is defined under Bureau of Indian Standards (IS), originating from India, while BS 970 EN2A/1 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, IS 1570 (Part 2/Sec 1) 5C4 vs BS 970 EN2A/1 is a 98.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 98.9%.

Frequently Compared With IS 1570 (Part 2/Sec 1) 5C4:
BS 970 (Part 1) 040A10 BS 970 (Part 1) 055M15 BS 970 (Part 3) 070M55 BS 970 (Part 1) 040A04 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 060A32 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10
Match Breakdown
CHEMISTRY MATCH
98.9%
MECHANICAL MATCH
No shared data
OVERALL
98.9%
Specifications
Property IS 1570 (Part 2/Sec 1) 5C4 BS 970 EN2A/1
Standard IS 1570 (Part 2/Sec 1):1979 BS 970:1955
Category Carbon Steel Carbon Steel
C (%) <=0.10 <=0.10
Mn (%) <=0.50 <=0.50
S (%) Not specified <=0.040
P (%) Not specified <=0.040
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
IS 1570 (Part 2/Sec 1) 5C4
Rivet wire for the bearing industry and bearing cage strip (the standard links this grade to IS 4882, IS 4397)
BS 970 EN2A/1
Bars and billets for forging; forgings and drop-forgings; bars for machining
Key Differences
Can IS 1570 (Part 2/Sec 1) 5C4 Be Substituted With BS 970 EN2A/1?
IS 1570 (Part 2/Sec 1) 5C4 and BS 970 EN2A/1 overlap closely enough on chemistry and mechanical properties that BS 970 EN2A/1 is often considered as a substitute for IS 1570 (Part 2/Sec 1) 5C4 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 1570 (Part 2/Sec 1) 5C4
0 active listings and RFQs →
BS 970 EN2A/1
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 2/Sec 1) 5C4 and BS 970 EN2A/1?
BS 970 EN2A/1 specifies S, P which are not specified for IS 1570 (Part 2/Sec 1) 5C4.
Can IS 1570 (Part 2/Sec 1) 5C4 be substituted with BS 970 EN2A/1?
IS 1570 (Part 2/Sec 1) 5C4 and BS 970 EN2A/1 overlap closely enough on chemistry and mechanical properties that BS 970 EN2A/1 is often considered as a substitute for IS 1570 (Part 2/Sec 1) 5C4 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.