Post Stock Login Register

IS 1570 (Part 2/Sec 1) 70C6 vs SAE J403 1070

Strong Match — 97.1% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 2/Sec 1) 70C6 (IS 1570 (Part 2/Sec 1):1979) and SAE J403 1070 (SAE J403:2014) are both steel grades. Both fall under the Carbon Steel category. IS 1570 (Part 2/Sec 1) 70C6 is typically used for cold rolled strip for springs, spring washers and cold rolled medium and high carbon strip (the standard links this grade to is 2507, is 4072, is 7226), while SAE J403 1070 is commonly used for chemistry-only grade; product scope as listed in the composition notes. IS 1570 (Part 2/Sec 1) 70C6 is defined under Bureau of Indian Standards (IS), originating from India, while SAE J403 1070 is defined under SAE International, originating from United States.

As per chemical composition, IS 1570 (Part 2/Sec 1) 70C6 vs SAE J403 1070 is a 97.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 97.1%.

Frequently Compared With IS 1570 (Part 2/Sec 1) 70C6:
BS 970 (Part 1) 060A67 BS 970 (Part 1) 060A72 BS 970 (Part 3) 070M55 BS 970 (Part 1) 040A10 BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 3) 045M10
Match Breakdown
CHEMISTRY MATCH
97.1%
MECHANICAL MATCH
No shared data
OVERALL
97.1%
Specifications
Property IS 1570 (Part 2/Sec 1) 70C6 SAE J403 1070
Standard IS 1570 (Part 2/Sec 1):1979 SAE J403:2014
Category Carbon Steel Carbon Steel
C (%) 0.65-0.75 0.65-0.75
Mn (%) 0.50-0.80 0.60-0.90
P (%) Not specified <=0.030 (flat rolled), <=0.040 (long products)
S (%) Not specified <=0.035 (flat rolled), <=0.050 (long products)
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
IS 1570 (Part 2/Sec 1) 70C6
Cold rolled strip for springs, spring washers and cold rolled medium and high carbon strip (the standard links this grade to IS 2507, IS 4072, IS 7226)
SAE J403 1070
Chemistry-only grade; product scope as listed in the composition notes
Key Differences
Can IS 1570 (Part 2/Sec 1) 70C6 Be Substituted With SAE J403 1070?
IS 1570 (Part 2/Sec 1) 70C6 and SAE J403 1070 overlap closely enough on chemistry and mechanical properties that SAE J403 1070 is often considered as a substitute for IS 1570 (Part 2/Sec 1) 70C6 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 1570 (Part 2/Sec 1) 70C6
0 active listings and RFQs →
SAE J403 1070
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 2/Sec 1) 70C6 and SAE J403 1070?
SAE J403 1070 specifies P, S which are not specified for IS 1570 (Part 2/Sec 1) 70C6.
Can IS 1570 (Part 2/Sec 1) 70C6 be substituted with SAE J403 1070?
IS 1570 (Part 2/Sec 1) 70C6 and SAE J403 1070 overlap closely enough on chemistry and mechanical properties that SAE J403 1070 is often considered as a substitute for IS 1570 (Part 2/Sec 1) 70C6 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.