Post Stock Login Register

IS 1570 (Part 2/Sec 1) 80C6 vs BS 970 (Part 3) 045M10

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 2/Sec 1) 80C6 (IS 1570 (Part 2/Sec 1):1979) and BS 970 (Part 3) 045M10 (BS 970 (Part 3):1991) are both steel grades. Both fall under the Carbon Steel category. IS 1570 (Part 2/Sec 1) 80C6 is typically used for cold rolled strip for springs and spring washers (the standard links this grade to is 2507, is 4072), while BS 970 (Part 3) 045M10 is commonly used for bright cold finished bars (cold drawn, turned or precision ground) for general engineering purposes, in straight lengths; case hardening steel, carbon and carbon manganese (table 14). IS 1570 (Part 2/Sec 1) 80C6 is defined under Bureau of Indian Standards (IS), originating from India, while BS 970 (Part 3) 045M10 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, IS 1570 (Part 2/Sec 1) 80C6 vs BS 970 (Part 3) 045M10 is a 81.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With IS 1570 (Part 2/Sec 1) 80C6:
BS 970 (Part 1) 060A81 BS 970 (Part 1) 060A78 BS 970 (Part 1) 040A10 BS 970 (Part 1) 040A12 BS 970 (Part 1) 080A20 BS 970 (Part 3) 070M55 BS 970 (Part 1) 040A04 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045M10
Match Breakdown
CHEMISTRY MATCH
81.1%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property IS 1570 (Part 2/Sec 1) 80C6 BS 970 (Part 3) 045M10
Standard IS 1570 (Part 2/Sec 1):1979 BS 970 (Part 3):1991
Category Carbon Steel Carbon Steel
C (%) 0.75-0.85 0.07-0.13
Mn (%) 0.50-0.80 0.30-0.60
Si (%) Not specified 0.10-0.40
P (%) Not specified <=0.05
S (%) Not specified <=0.05
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
IS 1570 (Part 2/Sec 1) 80C6
Cold rolled strip for springs and spring washers (the standard links this grade to IS 2507, IS 4072)
BS 970 (Part 3) 045M10
Bright cold finished bars (cold drawn, turned or precision ground) for general engineering purposes, in straight lengths; case hardening steel, carbon and carbon manganese (Table 14)
Key Differences
Can IS 1570 (Part 2/Sec 1) 80C6 Be Substituted With BS 970 (Part 3) 045M10?
IS 1570 (Part 2/Sec 1) 80C6 and BS 970 (Part 3) 045M10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 1570 (Part 2/Sec 1) 80C6
0 active listings and RFQs →
BS 970 (Part 3) 045M10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 2/Sec 1) 80C6 and BS 970 (Part 3) 045M10?
BS 970 (Part 3) 045M10 specifies Si, P, S which are not specified for IS 1570 (Part 2/Sec 1) 80C6.
Can IS 1570 (Part 2/Sec 1) 80C6 be substituted with BS 970 (Part 3) 045M10?
IS 1570 (Part 2/Sec 1) 80C6 and BS 970 (Part 3) 045M10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.