Post Stock Login Register

IS 1570 (Part 4) 103Cr6 vs IS 1570 (Part 7) 10Cr36Mo10H

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 4) 103Cr6 (IS 1570 (Part 4):1988) and IS 1570 (Part 7) 10Cr36Mo10H (IS 1570 (Part 7):1992) are both steel grades. Both fall under the Alloy Steel category. IS 1570 (Part 4) 103Cr6 is defined under Bureau of Indian Standards (IS), originating from India, while IS 1570 (Part 7) 10Cr36Mo10H is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 1570 (Part 4) 103Cr6 vs IS 1570 (Part 7) 10Cr36Mo10H is a 64.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With IS 1570 (Part 4) 103Cr6:
IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 4) 10Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 105Cr5 GOST 4543 12HN3A IS 1570 (Part 4) 07Cr4Mo6 NF A35-565 100C6 IS 1570 (Part 7) 12Cr2Mo5V2H UNI 11234 100Cr6 IS 1570 (Part 7) 10Mo6H IS 11169 (Part 1) 10Ni5Cr4 IS 1570 (Part 7) 12Cr4Mo5H
Match Breakdown
CHEMISTRY MATCH
64.2%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property IS 1570 (Part 4) 103Cr6 IS 1570 (Part 7) 10Cr36Mo10H
Standard IS 1570 (Part 4):1988 IS 1570 (Part 7):1992
Category Alloy Steel Alloy Steel
C (%) 0.95-1.10 <=0.15
Si (%) 0.10-0.35 0.25-1.0
Mn (%) 0.25-0.45 0.30-0.60
Cr (%) 1.40-1.60 8.00-10.00
P (%) Not specified <=0.040
S (%) Not specified <=0.030
Mo (%) Not specified 0.90-1.10
Al (metallic) (%) Not specified <=0.02
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 4) 103Cr6 IS 1570 (Part 7) 10Cr36Mo10H
Tensile Strength Not specified 410-560 MPa
Yield Strength Not specified >=135 MPa (0.2 % proof stress)
Elongation Not specified >=20%
Condition Not specified Pipes, A, thickness - (first row of Table 3)
Typical Applications
IS 1570 (Part 4) 103Cr6
Not documented
IS 1570 (Part 7) 10Cr36Mo10H
Boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature
Key Differences
Can IS 1570 (Part 4) 103Cr6 Be Substituted With IS 1570 (Part 7) 10Cr36Mo10H?
IS 1570 (Part 4) 103Cr6 and IS 1570 (Part 7) 10Cr36Mo10H share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 1570 (Part 4) 103Cr6
0 active listings and RFQs →
IS 1570 (Part 7) 10Cr36Mo10H
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 4) 103Cr6 and IS 1570 (Part 7) 10Cr36Mo10H?
IS 1570 (Part 7) 10Cr36Mo10H specifies P, S, Mo, Al (metallic) which are not specified for IS 1570 (Part 4) 103Cr6.
Can IS 1570 (Part 4) 103Cr6 be substituted with IS 1570 (Part 7) 10Cr36Mo10H?
IS 1570 (Part 4) 103Cr6 and IS 1570 (Part 7) 10Cr36Mo10H share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.