Post Stock Login Register

IS 1570 (Part 4) 15Cr3 vs BS 970 EN206

Strong Match — 85% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 4) 15Cr3 (IS 1570 (Part 4):1988) and BS 970 EN206 (BS 970:1955) are both steel grades. Both fall under the Alloy Steel category. IS 1570 (Part 4) 15Cr3 is defined under Bureau of Indian Standards (IS), originating from India, while BS 970 EN206 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, IS 1570 (Part 4) 15Cr3 vs BS 970 EN206 is a 85% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 85%.

Frequently Compared With IS 1570 (Part 4) 15Cr3:
IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 10Mo6 NF A35-565 100C6 UNI 11234 100Cr6 GB/T 3077 12Cr2Ni4A GOST 4543 12HN3A IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 07Cr4Mo6 IS 1570 (Part 4) 10Cr20Mo6
Match Breakdown
CHEMISTRY MATCH
85%
MECHANICAL MATCH
No shared data
OVERALL
85%
Specifications
Property IS 1570 (Part 4) 15Cr3 BS 970 EN206
Standard IS 1570 (Part 4):1988 BS 970:1955
Category Alloy Steel Alloy Steel
C (%) 0.12-0.18 0.12-0.17
Si (%) 0.15-0.35 0.10-0.35
Mn (%) 0.40-0.60 0.30-0.50
Cr (%) 0.50-0.80 0.30-0.50
S (%) Not specified <=0.050
P (%) Not specified <=0.050
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 4) 15Cr3 BS 970 EN206
Tensile Strength >=590 MPa Not specified
Elongation >=13% Not specified
Izod Impact >=48 J Not specified
Condition Case hardening steel, refined and quenched, core properties Not specified
Key Differences
Can IS 1570 (Part 4) 15Cr3 Be Substituted With BS 970 EN206?
IS 1570 (Part 4) 15Cr3 and BS 970 EN206 overlap closely enough on chemistry and mechanical properties that BS 970 EN206 is often considered as a substitute for IS 1570 (Part 4) 15Cr3 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 1570 (Part 4) 15Cr3
0 active listings and RFQs →
BS 970 EN206
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 4) 15Cr3 and BS 970 EN206?
BS 970 EN206 specifies S, P which are not specified for IS 1570 (Part 4) 15Cr3.
Can IS 1570 (Part 4) 15Cr3 be substituted with BS 970 EN206?
IS 1570 (Part 4) 15Cr3 and BS 970 EN206 overlap closely enough on chemistry and mechanical properties that BS 970 EN206 is often considered as a substitute for IS 1570 (Part 4) 15Cr3 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.