Post Stock Login Register

IS 1570 (Part 4) 15Cr6Ni6 vs IS 11169 (Part 1) 10Ni5Cr4

Related Material — 61.9% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 4) 15Cr6Ni6 (IS 1570 (Part 4):1988) and IS 11169 (Part 1) 10Ni5Cr4 (IS 11169 (Part 1):2022) are both steel grades. Both fall under the Alloy Steel category. IS 1570 (Part 4) 15Cr6Ni6 is defined under Bureau of Indian Standards (IS), originating from India, while IS 11169 (Part 1) 10Ni5Cr4 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 1570 (Part 4) 15Cr6Ni6 vs IS 11169 (Part 1) 10Ni5Cr4 is a 61.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 61.9%.

Frequently Compared With IS 1570 (Part 4) 15Cr6Ni6:
GB/T 3077 12Cr2Ni4A IS 1570 (Part 4) 10Cr20Mo6 GOST 4543 12HN3A IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 105Cr5 IS 11169 (Part 1) 12Ni3Cr2 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 10Mo6 GB/T 3077 12CrNi2
Match Breakdown
CHEMISTRY MATCH
61.9%
MECHANICAL MATCH
No shared data
OVERALL
61.9%
Specifications
Property IS 1570 (Part 4) 15Cr6Ni6 IS 11169 (Part 1) 10Ni5Cr4
Standard IS 1570 (Part 4):1988 IS 11169 (Part 1):2022
Category Alloy Steel Alloy Steel
C (%) 0.12-0.18 0.07-0.12
Si (%) 0.15-0.35 <=0.30
Mn (%) 0.40-0.60 0.60-0.90
Ni (%) 1.40-1.70 1.20-1.50
Cr (%) 1.40-1.70 0.90-1.20
Cu (%) Not specified <=0.25
P (%) Not specified <=0.025
S (%) Not specified <=0.025
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 4) 15Cr6Ni6 IS 11169 (Part 1) 10Ni5Cr4
Hardness, ferrite-pearlite (+FP) Not specified 137-187 HB
Tensile Strength, annealed (+AC) Not specified <=520 MPa (over 5 to 40 mm)
Typical Applications
IS 1570 (Part 4) 15Cr6Ni6
Not documented
IS 11169 (Part 1) 10Ni5Cr4
Cold heading and cold extrusion of parts that are case hardened; the standard covers bars, wire rods and wires of 2 to 100 mm (clause 1.1, Annex B)
Key Differences
Can IS 1570 (Part 4) 15Cr6Ni6 Be Substituted With IS 11169 (Part 1) 10Ni5Cr4?
IS 1570 (Part 4) 15Cr6Ni6 and IS 11169 (Part 1) 10Ni5Cr4 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 1570 (Part 4) 15Cr6Ni6
0 active listings and RFQs →
IS 11169 (Part 1) 10Ni5Cr4
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 4) 15Cr6Ni6 and IS 11169 (Part 1) 10Ni5Cr4?
IS 11169 (Part 1) 10Ni5Cr4 specifies Cu, P, S which are not specified for IS 1570 (Part 4) 15Cr6Ni6.
Can IS 1570 (Part 4) 15Cr6Ni6 be substituted with IS 11169 (Part 1) 10Ni5Cr4?
IS 1570 (Part 4) 15Cr6Ni6 and IS 11169 (Part 1) 10Ni5Cr4 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.