Post Stock Login Register

IS 1570 (Part 4) 16Ni6Cr7Mo3 vs EN 10084 17CrNiMo6

Strong Match — 88.3% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 4) 16Ni6Cr7Mo3 (IS 1570 (Part 4):1988) and EN 10084 17CrNiMo6 (EN 10084:1998) are both steel grades. Both fall under the Alloy Steel category. IS 1570 (Part 4) 16Ni6Cr7Mo3 is defined under Bureau of Indian Standards (IS), originating from India, while EN 10084 17CrNiMo6 is defined under European Standard (EN), originating from Europe.

As per chemical composition, IS 1570 (Part 4) 16Ni6Cr7Mo3 vs EN 10084 17CrNiMo6 is a 88.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 88.3%.

Frequently Compared With IS 1570 (Part 4) 16Ni6Cr7Mo3:
IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 07Cr4Mo6 UNI 11234 100Cr6 GB/T 3077 12Cr2Ni4A IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 10Mo6 GOST 4543 12HN3A NF A35-565 100C6 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 07Cr4Mo6 IS 1570 (Part 7) 10Cr36Mo10H
Match Breakdown
CHEMISTRY MATCH
88.3%
MECHANICAL MATCH
No shared data
OVERALL
88.3%
Specifications
Property IS 1570 (Part 4) 16Ni6Cr7Mo3 EN 10084 17CrNiMo6
Standard IS 1570 (Part 4):1988 EN 10084:1998
Category Alloy Steel Alloy Steel
C (%) 0.14-0.19 0.15-0.21
Si (%) 0.15-0.35 0.15-0.40
Mn (%) 0.40-0.60 0.50-0.90
Ni (%) 1.40-1.70 1.40-1.70
Cr (%) 1.50-1.80 1.50-1.80
Mo (%) 0.25-0.35 0.25-0.35
P (%) Not specified <=0.025
S (%) Not specified <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 4) 16Ni6Cr7Mo3 EN 10084 17CrNiMo6
Tensile Strength Not specified 900-1200 MPa
Yield Strength Not specified 750 MPa min
Elongation Not specified 9-12%
Hardness Not specified 280-340 HB
Typical Applications
IS 1570 (Part 4) 16Ni6Cr7Mo3
Not documented
EN 10084 17CrNiMo6
Used in heavy-duty gears, pinions, drive shafts, transmission parts, and industrial gearboxes.
Key Differences
Can IS 1570 (Part 4) 16Ni6Cr7Mo3 Be Substituted With EN 10084 17CrNiMo6?
IS 1570 (Part 4) 16Ni6Cr7Mo3 and EN 10084 17CrNiMo6 overlap closely enough on chemistry and mechanical properties that EN 10084 17CrNiMo6 is often considered as a substitute for IS 1570 (Part 4) 16Ni6Cr7Mo3 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
IS 1570 (Part 4) 16Ni6Cr7Mo3
No active listings currently.
EN 10084 17CrNiMo6
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5900–6200 mm (232.28–244.09 in)
On M-EX Right Now
IS 1570 (Part 4) 16Ni6Cr7Mo3
0 active listings and RFQs →
EN 10084 17CrNiMo6
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 4) 16Ni6Cr7Mo3 and EN 10084 17CrNiMo6?
EN 10084 17CrNiMo6 specifies P, S which are not specified for IS 1570 (Part 4) 16Ni6Cr7Mo3.
Can IS 1570 (Part 4) 16Ni6Cr7Mo3 be substituted with EN 10084 17CrNiMo6?
IS 1570 (Part 4) 16Ni6Cr7Mo3 and EN 10084 17CrNiMo6 overlap closely enough on chemistry and mechanical properties that EN 10084 17CrNiMo6 is often considered as a substitute for IS 1570 (Part 4) 16Ni6Cr7Mo3 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.