Post Stock Login Register

IS 1570 (Part 4) 16Ni6Cr7Mo3 vs GB/T 3077 17CrNiMo6

Strong Match — 92.4% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 4) 16Ni6Cr7Mo3 (IS 1570 (Part 4):1988) and GB/T 3077 17CrNiMo6 (GB/T 3077-2015) are both steel grades. Both fall under the Alloy Steel category. IS 1570 (Part 4) 16Ni6Cr7Mo3 is defined under Bureau of Indian Standards (IS), originating from India, while GB/T 3077 17CrNiMo6 is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, IS 1570 (Part 4) 16Ni6Cr7Mo3 vs GB/T 3077 17CrNiMo6 is a 92.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 92.4%.

Frequently Compared With IS 1570 (Part 4) 16Ni6Cr7Mo3:
IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 07Cr4Mo6 GB/T 3077 12Cr2Ni4A UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 GOST 4543 12HN3A NF A35-565 100C6 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 4) 10Mo6 IS 4367 07Cr4Mo6 IS 1570 (Part 7) 10Cr36Mo10H
Match Breakdown
CHEMISTRY MATCH
92.4%
MECHANICAL MATCH
No shared data
OVERALL
92.4%
Specifications
Property IS 1570 (Part 4) 16Ni6Cr7Mo3 GB/T 3077 17CrNiMo6
Standard IS 1570 (Part 4):1988 GB/T 3077-2015
Category Alloy Steel Alloy Steel
C (%) 0.14-0.19 0.14-0.19
Si (%) 0.15-0.35 0.17-0.37
Mn (%) 0.40-0.60 0.50-0.80
Ni (%) 1.40-1.70 1.40-1.70
Cr (%) 1.50-1.80 1.50-1.80
Mo (%) 0.25-0.35 0.25-0.35
P (%) Not specified 0.025 max
S (%) Not specified 0.035 max
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 4) 16Ni6Cr7Mo3 GB/T 3077 17CrNiMo6
Tensile Strength Not specified 1000-1200 MPa
Yield Strength Not specified 800-1000 MPa
Elongation Not specified 9-13%
Hardness Not specified 58-62 HRC (case)
Typical Applications
IS 1570 (Part 4) 16Ni6Cr7Mo3
Not documented
GB/T 3077 17CrNiMo6
Used for automotive gears, gearboxes, shafts, pinions, industrial reducers, and heavy machinery components.
Key Differences
Can IS 1570 (Part 4) 16Ni6Cr7Mo3 Be Substituted With GB/T 3077 17CrNiMo6?
IS 1570 (Part 4) 16Ni6Cr7Mo3 and GB/T 3077 17CrNiMo6 overlap closely enough on chemistry and mechanical properties that GB/T 3077 17CrNiMo6 is often considered as a substitute for IS 1570 (Part 4) 16Ni6Cr7Mo3 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
IS 1570 (Part 4) 16Ni6Cr7Mo3
No active listings currently.
GB/T 3077 17CrNiMo6
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5800–6000 mm (228.35–236.22 in)
On M-EX Right Now
IS 1570 (Part 4) 16Ni6Cr7Mo3
0 active listings and RFQs →
GB/T 3077 17CrNiMo6
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 4) 16Ni6Cr7Mo3 and GB/T 3077 17CrNiMo6?
GB/T 3077 17CrNiMo6 specifies P, S which are not specified for IS 1570 (Part 4) 16Ni6Cr7Mo3.
Can IS 1570 (Part 4) 16Ni6Cr7Mo3 be substituted with GB/T 3077 17CrNiMo6?
IS 1570 (Part 4) 16Ni6Cr7Mo3 and GB/T 3077 17CrNiMo6 overlap closely enough on chemistry and mechanical properties that GB/T 3077 17CrNiMo6 is often considered as a substitute for IS 1570 (Part 4) 16Ni6Cr7Mo3 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.