Post Stock Login Register

IS 1570 (Part 4) 50Cr4 vs IS 1570 (Part 4) 60Cr4V2

Close Alternative — 81.1% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 4) 50Cr4 (IS 1570 (Part 4):1988) and IS 1570 (Part 4) 60Cr4V2 (IS 1570 (Part 4):1988) are both steel grades. Both fall under the Alloy Steel category. IS 1570 (Part 4) 50Cr4 is defined under Bureau of Indian Standards (IS), originating from India, while IS 1570 (Part 4) 60Cr4V2 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 1570 (Part 4) 50Cr4 vs IS 1570 (Part 4) 60Cr4V2 is a 81.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 81.1%.

Frequently Compared With IS 1570 (Part 4) 50Cr4:
IS 1570 (Part 4) 105Cr5 NF A35-565 100C6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 10Mo6 GB/T 3077 12Cr2Ni4A GOST 4543 12HN3A IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 103Cr6 IS 4367 07Cr4Mo6 UNI 11234 100Cr6 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 4) 10Cr20Mo6
Match Breakdown
CHEMISTRY MATCH
81.1%
MECHANICAL MATCH
No shared data
OVERALL
81.1%
Specifications
Property IS 1570 (Part 4) 50Cr4 IS 1570 (Part 4) 60Cr4V2
Standard IS 1570 (Part 4):1988 IS 1570 (Part 4):1988
Category Alloy Steel Alloy Steel
C (%) 0.45-0.55 0.55-0.65
Si (%) 0.10-0.35 0.10-0.35
Mn (%) 0.60-0.90 0.80-1.10
Cr (%) 0.90-1.20 0.90-1.20
V (%) Not specified >=0.15
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 4) 50Cr4 IS 1570 (Part 4) 60Cr4V2
Tensile Strength >=1090 MPa Not specified
Yield Strength >=890 MPa Not specified
Condition Tubes, hardened and tempered Not specified
Key Differences
Can IS 1570 (Part 4) 50Cr4 Be Substituted With IS 1570 (Part 4) 60Cr4V2?
IS 1570 (Part 4) 50Cr4 and IS 1570 (Part 4) 60Cr4V2 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
IS 1570 (Part 4) 50Cr4
0 active listings and RFQs →
IS 1570 (Part 4) 60Cr4V2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 4) 50Cr4 and IS 1570 (Part 4) 60Cr4V2?
IS 1570 (Part 4) 60Cr4V2 specifies V which is not specified for IS 1570 (Part 4) 50Cr4.
Can IS 1570 (Part 4) 50Cr4 be substituted with IS 1570 (Part 4) 60Cr4V2?
IS 1570 (Part 4) 50Cr4 and IS 1570 (Part 4) 60Cr4V2 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.