Post Stock Login Register

IS 1570 (Part 4) 60Cr4V2 vs SAE J404 5160

Close Alternative — 78.7% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 4) 60Cr4V2 (IS 1570 (Part 4):1988) and SAE J404 5160 (SAE J404:2009) are both steel grades. Both fall under the Alloy Steel category. IS 1570 (Part 4) 60Cr4V2 is defined under Bureau of Indian Standards (IS), originating from India, while SAE J404 5160 is defined under SAE International, originating from United States.

As per chemical composition, IS 1570 (Part 4) 60Cr4V2 vs SAE J404 5160 is a 78.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 78.7%.

Frequently Compared With IS 1570 (Part 4) 60Cr4V2:
IS 1570 (Part 7) 10Cr36Mo10H IS 4367 10Cr9Mo10 EN 10028-2 10CrMo9-10 IS 1570 (Part 4) 10Mo6 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 NF A35-565 100C6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Mo6H
Match Breakdown
CHEMISTRY MATCH
78.7%
MECHANICAL MATCH
No shared data
OVERALL
78.7%
Specifications
Property IS 1570 (Part 4) 60Cr4V2 SAE J404 5160
Standard IS 1570 (Part 4):1988 SAE J404:2009
Category Alloy Steel Alloy Steel
C (%) 0.55-0.65 0.56-0.64
Si (%) 0.10-0.35 0.15-0.35
Mn (%) 0.80-1.10 0.75-1.00
Cr (%) 0.90-1.20 0.70-0.90
V (%) >=0.15 Not specified
P (%) Not specified <=0.030
S (%) Not specified <=0.040
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
IS 1570 (Part 4) 60Cr4V2
Not documented
SAE J404 5160
Automotive leaf springs, coil springs
Key Differences
Can IS 1570 (Part 4) 60Cr4V2 Be Substituted With SAE J404 5160?
IS 1570 (Part 4) 60Cr4V2 and SAE J404 5160 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
Forms & Sizes Available on M-EX
IS 1570 (Part 4) 60Cr4V2
No active listings currently.
SAE J404 5160
Round Bar → (3 listings)
Diameter: 60–60 mm (2.36–2.36 in)
Length: 5200–6400 mm (204.72–251.97 in)
On M-EX Right Now
IS 1570 (Part 4) 60Cr4V2
0 active listings and RFQs →
SAE J404 5160
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 4) 60Cr4V2 and SAE J404 5160?
IS 1570 (Part 4) 60Cr4V2 specifies V which is not specified for SAE J404 5160. SAE J404 5160 specifies P, S which are not specified for IS 1570 (Part 4) 60Cr4V2.
Can IS 1570 (Part 4) 60Cr4V2 be substituted with SAE J404 5160?
IS 1570 (Part 4) 60Cr4V2 and SAE J404 5160 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.