Post Stock Login Register

IS 1570 (Part 4) 60Si7 vs IS 3195 113C6

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 4) 60Si7 (IS 1570 (Part 4):1988) and IS 3195 113C6 (IS 3195:1992) are both steel grades. Both fall under the Spring Steel category. IS 1570 (Part 4) 60Si7 is defined under Bureau of Indian Standards (IS), originating from India, while IS 3195 113C6 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 1570 (Part 4) 60Si7 vs IS 3195 113C6 is a 77.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With IS 1570 (Part 4) 60Si7:
IS 3431 60Si7 IS 1570 (Part 4) 65Si7 IS 1570 (Part 4) 55Si7 IS 3431 55Si7 IS 4367 55Si7 IS 3195 55Si7 IS 3431 65Si7 IS 3195 98C6 EN 10089 55Si7 EN 10089 50CrV4 IS 3195 60Si7 IS 3195 65Si7
Match Breakdown
CHEMISTRY MATCH
77.8%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property IS 1570 (Part 4) 60Si7 IS 3195 113C6
Standard IS 1570 (Part 4):1988 IS 3195:1992
Category Spring Steel Spring Steel
C (%) 0.55-0.65 1.05-1.20
Si (%) 1.50-2.00 0.15-0.35
Mn (%) 0.80-1.00 0.50-0.80
P (%) Not specified <=0.050
S (%) Not specified <=0.050
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 4) 60Si7 IS 3195 113C6
Hardness, annealed Not specified <=240 HB
Typical Applications
IS 1570 (Part 4) 60Si7
Not documented
IS 3195 113C6
Volute and helical springs for railway rolling stock; flats and rounds, springs worked hot and heat-treated (clause 1.1, foreword)
Key Differences
Can IS 1570 (Part 4) 60Si7 Be Substituted With IS 3195 113C6?
IS 1570 (Part 4) 60Si7 and IS 3195 113C6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 1570 (Part 4) 60Si7
0 active listings and RFQs →
IS 3195 113C6
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 4) 60Si7 and IS 3195 113C6?
IS 3195 113C6 specifies P, S which are not specified for IS 1570 (Part 4) 60Si7.
Can IS 1570 (Part 4) 60Si7 be substituted with IS 3195 113C6?
IS 1570 (Part 4) 60Si7 and IS 3195 113C6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.