Post Stock Login Register

IS 1570 (Part 5):1985 X04Cr19Ni9 Steel: Specifications & Listings

IS 1570 (Part 5):1985 X04Cr19Ni9: X04Cr19Ni9: high alloy, stainless or heat-resisting steel. Specified in IS 1570 (Part 5):1985.

Category: Stainless Steel
Grade Details
GradeIS 1570 (Part 5):1985 X04Cr19Ni9
Standard IS 1570 (Part 5):1985
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
IS 6911 X04Cr19Ni9 IS 6911:1992 India 2 listings, 0 RFQs →
BS 970 (Part 3) 304S15 BS 970 (Part 3):1991 UK No activity yet
ASTM A276/A276M S30400 ASTM A276/A276M:2017 USA No activity yet
ASTM A276/A276M S30800 ASTM A276/A276M:2017 USA No activity yet
EN 10088-1 X5CrNi18-10 EN 10088-1:2023 Europe (CEN) No activity yet
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
ASTM A276/A276M S30400 ASTM A276/A276M:2017 Strong Match
ASTM A959 SS304 ASTM A959:2011 Strong Match
IS 1570 (Part 5) X04Cr18Ni10Ti IS 1570 (Part 5):1985 Strong Match
IS 1570 (Part 5) X04Cr18Ni10Nb IS 1570 (Part 5):1985 Strong Match
IS 1570 (Part 5) X07Cr18Ni9 IS 1570 (Part 5):1985 Strong Match
BS 970 (Part 3) 304S31 BS 970 (Part 3):1991 Strong Match
BS 970 (Part 1) 304S31 BS 970 (Part 1):1983 Strong Match
BS 970 (Part 3) 304S15 BS 970 (Part 3):1991 Strong Match
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Si Mn P S Cr Ni
<=0.08 <=1.0 <=2.0 <=0.045 <=0.030 17.5-20.0 8.0-10.5
Mechanical Properties
Tensile Strength >=515 MPa
Yield Strength >=205 MPa (0.2 % proof stress)
Elongation >=40% (50 mm)
Hardness <=183 HB; <=88 HRB
Condition Annealed, quenched or solution treated plates, sheets and strips (Table 2)

More data from IS 1570 (Part 5):1985

From the standard
Annealed, quenched or solution treated plates, sheets and strips 5 properties
Tensile strength, min
515 MPa
0.2 % proof stress, min
205 MPa
Elongation in 50 mm, min
40%
Brinell hardness, max
183 HB
Rockwell B hardness, max
88 HRB
Source: IS 1570 (Part 5):1985, Table 2
Annealed, quenched or solution treated bars and flats 4 properties
Tensile strength, min
517 MPa
0.2 % proof stress, min
207 MPa
Elongation in 50 mm, min
40%
Reduction of area, min
50%
Source: IS 1570 (Part 5):1985, Table 3

Active IS 1570 (Part 5):1985 X04Cr19Ni9 Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active IS 1570 (Part 5):1985 X04Cr19Ni9 listings at this time.

Register for Alerts

Buyer RFQs for IS 1570 (Part 5):1985 X04Cr19Ni9

+ Post an RFQ for this grade

No open buyer requirements for IS 1570 (Part 5):1985 X04Cr19Ni9 at this time.

Register for Alerts