Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C
Si
Mn
P
S
Cr
Ni
<=0.20
<=1.5
<=2.0
<=0.045
<=0.030
22.0-25.0
11.0-15.0
Mechanical Properties
Tensile Strength
>=490 MPa
Yield Strength
>=210 MPa (0.2 % proof stress)
Elongation
>=40% (50 mm)
Hardness
<=223 HB; <=95 HRB
Condition
Annealed, quenched or solution treated plates, sheets and strips (Table 2)
More data from IS 1570 (Part 5):1985
From the standard
Annealed, quenched or solution treated plates, sheets and strips5 properties
Tensile strength, min
490 MPa
0.2 % proof stress, min
210 MPa
Elongation in 50 mm, min
40%
Brinell hardness, max
223 HB
Rockwell B hardness, max
95 HRB
Source: IS 1570 (Part 5):1985, Table 2
Annealed, quenched or solution treated bars and flats4 properties
Tensile strength, min
490 MPa
0.2 % proof stress, min
210 MPa
Elongation in 50 mm, min
40%
Reduction of area, min
50%
Source: IS 1570 (Part 5):1985, Table 3
Recommended heat treatment2 entries
Solution treatment (softening) temperature
1000 to 1150 deg C
Solution treatment quenching medium
water, oil, air
A annealing, S softening, ST solution treatment, Q quenching, T tempering, P patenting.
Source: IS 1570 (Part 5):1985, Table 7
Active IS 1570 (Part 5):1985 X15Cr24Ni13 Listings on M-EX (For Sale)