Post Stock Login Register

IS 1570 (Part 5) X20Cr21Ni12N vs EN 10088-1 X9CrNiSiNCe21-11-2

Close Alternative — 73.8% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 5) X20Cr21Ni12N (IS 1570 (Part 5):1985) and EN 10088-1 X9CrNiSiNCe21-11-2 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. IS 1570 (Part 5) X20Cr21Ni12N is defined under Bureau of Indian Standards (IS), originating from India, while EN 10088-1 X9CrNiSiNCe21-11-2 is defined under European Standard (EN), originating from Europe.

As per chemical composition, IS 1570 (Part 5) X20Cr21Ni12N vs EN 10088-1 X9CrNiSiNCe21-11-2 is a 73.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 73.8%.

Frequently Compared With IS 1570 (Part 5) X20Cr21Ni12N:
GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 IS 1570 (Part 7) 12Cr13H EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 GOST 5632 12Kh13 IS 1570 (Part 7) 12Cr12MoH ASTM A959 .- IS 1570 (Part 7) 11Cr17Ni13W3TiH
Match Breakdown
CHEMISTRY MATCH
73.8%
MECHANICAL MATCH
No shared data
OVERALL
73.8%
Specifications
Property IS 1570 (Part 5) X20Cr21Ni12N EN 10088-1 X9CrNiSiNCe21-11-2
Standard IS 1570 (Part 5):1985 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) 0.15-0.25 0.05-0.12
Si (%) 0.75-1.25 1.40-2.50
Mn (%) <=1.5 <=1.00
P (%) <=0.045 <=0.045
S (%) <=0.035 <=0.015
Cr (%) 20.0-22.0 20.0-22.0
Ni (%) 10.5-12.5 10.0-12.0
N (%) Not specified 0.12-0.20
Ce (%) Not specified 0.03-0.08
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 5) X20Cr21Ni12N EN 10088-1 X9CrNiSiNCe21-11-2
Hardness <=302 HB Not specified
Condition Valve steel, hardened and tempered (Table 6) Not specified
Key Differences
Can IS 1570 (Part 5) X20Cr21Ni12N Be Substituted With EN 10088-1 X9CrNiSiNCe21-11-2?
IS 1570 (Part 5) X20Cr21Ni12N and EN 10088-1 X9CrNiSiNCe21-11-2 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
IS 1570 (Part 5) X20Cr21Ni12N
0 active listings and RFQs →
EN 10088-1 X9CrNiSiNCe21-11-2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 5) X20Cr21Ni12N and EN 10088-1 X9CrNiSiNCe21-11-2?
EN 10088-1 X9CrNiSiNCe21-11-2 specifies N, Ce which are not specified for IS 1570 (Part 5) X20Cr21Ni12N.
Can IS 1570 (Part 5) X20Cr21Ni12N be substituted with EN 10088-1 X9CrNiSiNCe21-11-2?
IS 1570 (Part 5) X20Cr21Ni12N and EN 10088-1 X9CrNiSiNCe21-11-2 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.