Post Stock Login Register

IS 1570 (Part 5) X53Cr22Mn9Ni4N vs IS 1570 (Part 7) 12Cr12MoVH

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 5) X53Cr22Mn9Ni4N (IS 1570 (Part 5):1985) and IS 1570 (Part 7) 12Cr12MoVH (IS 1570 (Part 7):1992) are both steel grades. Both fall under the Stainless Steel category. IS 1570 (Part 5) X53Cr22Mn9Ni4N is defined under Bureau of Indian Standards (IS), originating from India, while IS 1570 (Part 7) 12Cr12MoVH is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 1570 (Part 5) X53Cr22Mn9Ni4N vs IS 1570 (Part 7) 12Cr12MoVH is a 52% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With IS 1570 (Part 5) X53Cr22Mn9Ni4N:
GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 GOST 5632 08X18H10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H ASTM A959 .- IS 1570 (Part 7) 12Cr12MoH
Match Breakdown
CHEMISTRY MATCH
52%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property IS 1570 (Part 5) X53Cr22Mn9Ni4N IS 1570 (Part 7) 12Cr12MoVH
Standard IS 1570 (Part 5):1985 IS 1570 (Part 7):1992
Category Stainless Steel Stainless Steel
C (%) 0.48-0.58 0.08-0.16
Si (%) <=0.25 <=0.60
Mn (%) 8.0-10.0 0.40-1.00
P (%) <=0.045 <=0.040
S (%) <=0.035 <=0.035
Cr (%) 20.0-23.0 11.5-13.00
Ni (%) 3.25-4.50 <=1.0
Mo (%) Not specified 0.40-0.80
V (%) Not specified 0.10-0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 5) X53Cr22Mn9Ni4N IS 1570 (Part 7) 12Cr12MoVH
Hardness >=321 HB Not specified
Condition Valve steel, hardened and tempered (Table 6) Bars, forgings, Q+T, thickness up to 150 (first row of Table 3)
Tensile Strength Not specified 770-930 MPa
Yield Strength Not specified >=585 MPa (0.2 % proof stress)
Elongation Not specified >=15%
Typical Applications
IS 1570 (Part 5) X53Cr22Mn9Ni4N
Not documented
IS 1570 (Part 7) 12Cr12MoVH
Boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature
Key Differences
Can IS 1570 (Part 5) X53Cr22Mn9Ni4N Be Substituted With IS 1570 (Part 7) 12Cr12MoVH?
IS 1570 (Part 5) X53Cr22Mn9Ni4N and IS 1570 (Part 7) 12Cr12MoVH share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 1570 (Part 5) X53Cr22Mn9Ni4N
0 active listings and RFQs →
IS 1570 (Part 7) 12Cr12MoVH
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 5) X53Cr22Mn9Ni4N and IS 1570 (Part 7) 12Cr12MoVH?
IS 1570 (Part 7) 12Cr12MoVH specifies Mo, V which are not specified for IS 1570 (Part 5) X53Cr22Mn9Ni4N.
Can IS 1570 (Part 5) X53Cr22Mn9Ni4N be substituted with IS 1570 (Part 7) 12Cr12MoVH?
IS 1570 (Part 5) X53Cr22Mn9Ni4N and IS 1570 (Part 7) 12Cr12MoVH share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.