Post Stock Login Register

IS 1570 (Part 6) 55T8 vs IS 1570 (Part 6) T55Ni6Cr3

Close Alternative — 78.9% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 6) 55T8 (IS 1570 (Part 6):1996) and IS 1570 (Part 6) T55Ni6Cr3 (IS 1570 (Part 6):1996) are both steel grades. Both fall under the Tool & Die Steels category. IS 1570 (Part 6) 55T8 is defined under Bureau of Indian Standards (IS), originating from India, while IS 1570 (Part 6) T55Ni6Cr3 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 1570 (Part 6) 55T8 vs IS 1570 (Part 6) T55Ni6Cr3 is a 78.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 78.9%.

Frequently Compared With IS 1570 (Part 6) 55T8:
IS 1570 (Part 6) 103T3 IS 1570 (Part 6) 118T3 IS 1570 (Part 6) 70T6 EN ISO 4957 1.2316 DIN EN ISO 4957 1.2379 IS 1570 (Part 6) 50T8 IS 1570 (Part 6) 75T6 DIN EN ISO 4957 1.2344 IS 1570 (Part 6) 60T6 IS 1570 (Part 6) 65T6 EN ISO 683-17 100Cr6 IS 1570 (Part 6) 133T3
Match Breakdown
CHEMISTRY MATCH
78.9%
MECHANICAL MATCH
No shared data
OVERALL
78.9%
Specifications
Property IS 1570 (Part 6) 55T8 IS 1570 (Part 6) T55Ni6Cr3
Standard IS 1570 (Part 6):1996 IS 1570 (Part 6):1996
Category Tool & Die Steels Tool & Die Steels
C (%) 0.50-0.60 0.50-0.60
Si (%) 0.10-0.35 0.10-0.35
Mn (%) 0.60-0.90 0.50-0.80
P (%) <=0.035 <=0.035
S (%) <=0.035 <=0.035
Cr (%) <=0.20 0.50-0.80
Cu (%) <=0.25 Not specified
Ni (%) <=0.25 1.25-1.65
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Key Differences
Can IS 1570 (Part 6) 55T8 Be Substituted With IS 1570 (Part 6) T55Ni6Cr3?
IS 1570 (Part 6) 55T8 and IS 1570 (Part 6) T55Ni6Cr3 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
IS 1570 (Part 6) 55T8
0 active listings and RFQs →
IS 1570 (Part 6) T55Ni6Cr3
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 6) 55T8 and IS 1570 (Part 6) T55Ni6Cr3?
IS 1570 (Part 6) 55T8 specifies Cu which is not specified for IS 1570 (Part 6) T55Ni6Cr3.
Can IS 1570 (Part 6) 55T8 be substituted with IS 1570 (Part 6) T55Ni6Cr3?
IS 1570 (Part 6) 55T8 and IS 1570 (Part 6) T55Ni6Cr3 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.