Post Stock Login Register

IS 1570 (Part 6) 70T6 vs IS 1570 (Part 6) 50T8

Close Alternative — 84.9% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 6) 70T6 (IS 1570 (Part 6):1996) and IS 1570 (Part 6) 50T8 (IS 1570 (Part 6):1996) are both steel grades. Both fall under the Tool & Die Steels category. IS 1570 (Part 6) 70T6 is defined under Bureau of Indian Standards (IS), originating from India, while IS 1570 (Part 6) 50T8 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 1570 (Part 6) 70T6 vs IS 1570 (Part 6) 50T8 is a 89.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 84.9%.

Frequently Compared With IS 1570 (Part 6) 70T6:
IS 1570 (Part 6) 70T3 IS 1570 (Part 6) 55T8 IS 1570 (Part 6) 75T6 IS 1570 (Part 6) 65T6 IS 1570 (Part 6) 118T3 GOST 5950 3H2W8F IS 1570 (Part 6) 60T6 EN ISO 4957 1.2316 DIN EN ISO 4957 1.2344 EN ISO 683-17 100Cr6 IS 3748 65T6 IS 3748 70T6
Match Breakdown
CHEMISTRY MATCH
89.2%
MECHANICAL MATCH
No shared data
OVERALL
84.9%
Specifications
Property IS 1570 (Part 6) 70T6 IS 1570 (Part 6) 50T8
Standard IS 1570 (Part 6):1996 IS 1570 (Part 6):1996
Category Tool & Die Steels Tool & Die Steels
C (%) 0.65-0.75 0.45-0.55
Si (%) 0.10-0.35 0.10-0.35
Mn (%) 0.50-0.80 0.60-0.90
P (%) <=0.035 <=0.035
S (%) <=0.035 <=0.035
Cr (%) <=0.20 <=0.20
Cu (%) <=0.25 <=0.25
Ni (%) <=0.25 <=0.25
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Can IS 1570 (Part 6) 70T6 Be Substituted With IS 1570 (Part 6) 50T8?
IS 1570 (Part 6) 70T6 and IS 1570 (Part 6) 50T8 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
IS 1570 (Part 6) 70T6
0 active listings and RFQs →
IS 1570 (Part 6) 50T8
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 6) 70T6 and IS 1570 (Part 6) 50T8?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 1570 (Part 6) 70T6 be substituted with IS 1570 (Part 6) 50T8?
IS 1570 (Part 6) 70T6 and IS 1570 (Part 6) 50T8 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.