Post Stock Login Register

IS 1570 (Part 6) 80T6 vs IS 1570 (Part 6) 50T8

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 6) 80T6 (IS 1570 (Part 6):1996) and IS 1570 (Part 6) 50T8 (IS 1570 (Part 6):1996) are both steel grades. Both fall under the Tool & Die Steels category. IS 1570 (Part 6) 80T6 is defined under Bureau of Indian Standards (IS), originating from India, while IS 1570 (Part 6) 50T8 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 1570 (Part 6) 80T6 vs IS 1570 (Part 6) 50T8 is a 89.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With IS 1570 (Part 6) 80T6:
IS 1570 (Part 6) 70T6 IS 1570 (Part 6) 75T6 IS 1570 (Part 6) 118T3 IS 1570 (Part 6) 65T6 IS 1570 (Part 6) 55T8 EN ISO 4957 1.2316 EN ISO 683-17 100Cr6 IS 1570 (Part 6) 103T3 IS 1570 (Part 6) 60T6 DIN EN ISO 4957 1.2344 IS 1570 (Part 6) 70T3 DIN EN ISO 4957 1.2379
Match Breakdown
CHEMISTRY MATCH
89.2%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property IS 1570 (Part 6) 80T6 IS 1570 (Part 6) 50T8
Standard IS 1570 (Part 6):1996 IS 1570 (Part 6):1996
Category Tool & Die Steels Tool & Die Steels
C (%) 0.75-0.85 0.45-0.55
Si (%) 0.10-0.35 0.10-0.35
Mn (%) 0.50-0.80 0.60-0.90
P (%) <=0.035 <=0.035
S (%) <=0.035 <=0.035
Cr (%) <=0.20 <=0.20
Cu (%) <=0.25 <=0.25
Ni (%) <=0.25 <=0.25
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Can IS 1570 (Part 6) 80T6 Be Substituted With IS 1570 (Part 6) 50T8?
IS 1570 (Part 6) 80T6 and IS 1570 (Part 6) 50T8 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 1570 (Part 6) 80T6
0 active listings and RFQs →
IS 1570 (Part 6) 50T8
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 6) 80T6 and IS 1570 (Part 6) 50T8?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 1570 (Part 6) 80T6 be substituted with IS 1570 (Part 6) 50T8?
IS 1570 (Part 6) 80T6 and IS 1570 (Part 6) 50T8 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.