Post Stock Login Register

IS 1570 (Part 6) T103V2 vs GOST 1435 U10

Strong Match — 85.2% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 6) T103V2 (IS 1570 (Part 6):1996) and GOST 1435 U10 (GOST 1435-1999) are both steel grades. Both fall under the Tool & Die Steels category. IS 1570 (Part 6) T103V2 is defined under Bureau of Indian Standards (IS) (India).

As per chemical composition, IS 1570 (Part 6) T103V2 vs GOST 1435 U10 is a 85.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 85.2%.

Frequently Compared With IS 1570 (Part 6) T103V2:
IS 1570 (Part 6) 103T3 IS 1570 (Part 6) 118T3 DIN EN ISO 4957 1.2379 EN ISO 683-17 100Cr6 IS 1570 (Part 6) 133T3 GOST 5950 3H2W8F GB/T 1299 3Cr2W8V GB/T 1299 4Cr5MoSiV1 GOST 5950 4H5MFS EN ISO 4957 1.2316 DIN EN ISO 4957 1.2344 IS 3748 118T3
Match Breakdown
CHEMISTRY MATCH
85.2%
MECHANICAL MATCH
No shared data
OVERALL
85.2%
Specifications
Property IS 1570 (Part 6) T103V2 GOST 1435 U10
Standard IS 1570 (Part 6):1996 GOST 1435-1999
Category Tool & Die Steels Tool & Die Steels
Si (%) 0.10-0.35 0.17-0.33
Mn (%) <=0.40 0.17-0.33
V (%) 0.15-0.30 Not specified
P (%) <=0.035 0.03 max
S (%) <=0.035 0.028 max
C (%) 0.95-1.10 0.95-1.04
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 6) T103V2 GOST 1435 U10
Tensile Strength Not specified 750-900 MPa
Yield Strength Not specified 450 MPa min
Elongation Not specified 10% min
Hardness Not specified 60-64 HRC
Typical Applications
IS 1570 (Part 6) T103V2
Not documented
GOST 1435 U10
Used for chisels, punches, files, woodworking tools, and knives.
Key Differences
Can IS 1570 (Part 6) T103V2 Be Substituted With GOST 1435 U10?
IS 1570 (Part 6) T103V2 and GOST 1435 U10 overlap closely enough on chemistry and mechanical properties that GOST 1435 U10 is often considered as a substitute for IS 1570 (Part 6) T103V2 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
IS 1570 (Part 6) T103V2
No active listings currently.
GOST 1435 U10
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2800–3100 mm (110.24–122.05 in)
On M-EX Right Now
IS 1570 (Part 6) T103V2
0 active listings and RFQs →
GOST 1435 U10
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 6) T103V2 and GOST 1435 U10?
IS 1570 (Part 6) T103V2 specifies V which is not specified for GOST 1435 U10.
Can IS 1570 (Part 6) T103V2 be substituted with GOST 1435 U10?
IS 1570 (Part 6) T103V2 and GOST 1435 U10 overlap closely enough on chemistry and mechanical properties that GOST 1435 U10 is often considered as a substitute for IS 1570 (Part 6) T103V2 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.