Post Stock Login Register

IS 1570 (Part 6) T30Ni10Cr3Mo6 vs IS 3748 T40Ni6Cr4Mo3

Related Material — 67.6% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 6) T30Ni10Cr3Mo6 (IS 1570 (Part 6):1996) and IS 3748 T40Ni6Cr4Mo3 (IS 3748:1990) are both steel grades. Both fall under the Tool & Die Steels category. IS 1570 (Part 6) T30Ni10Cr3Mo6 is defined under Bureau of Indian Standards (IS), originating from India, while IS 3748 T40Ni6Cr4Mo3 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 1570 (Part 6) T30Ni10Cr3Mo6 vs IS 3748 T40Ni6Cr4Mo3 is a 67.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 67.6%.

Frequently Compared With IS 1570 (Part 6) T30Ni10Cr3Mo6:
GOST 5950 4H5MFS EN ISO 4957 1.2316 GB/T 1299 3Cr2W8V GOST 5950 3H2W8F EN ISO 683-17 100Cr6 IS 1570 (Part 6) 103T3 IS 1570 (Part 6) 118T3 GB/T 1299 4Cr5MoSiV1 DIN EN ISO 4957 1.2344 DIN EN ISO 4957 1.2379 IS 1570 (Part 6) 133T3 GB/T 1299 4Cr5MoSiV
Match Breakdown
CHEMISTRY MATCH
67.6%
MECHANICAL MATCH
No shared data
OVERALL
67.6%
Specifications
Property IS 1570 (Part 6) T30Ni10Cr3Mo6 IS 3748 T40Ni6Cr4Mo3
Standard IS 1570 (Part 6):1996 IS 3748:1990
Category Tool & Die Steels Tool & Die Steels
C (%) 0.25-0.35 0.35-0.45
Si (%) 0.10-0.35 0.10-0.35
Mn (%) 0.40-0.70 0.40-0.70
Ni (%) 2.25-2.75 1.25-1.75
Cr (%) 0.50-0.80 0.90-1.30
Mo (%) 0.40-0.70 0.20-0.35
P (%) <=0.035 <=0.035
S (%) <=0.035 <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 6) T30Ni10Cr3Mo6 IS 3748 T40Ni6Cr4Mo3
Hardness Not specified <=255 HB
Condition Not specified Annealed (maximum Brinell hardness)
Typical Applications
IS 1570 (Part 6) T30Ni10Cr3Mo6
Not documented
IS 3748 T40Ni6Cr4Mo3
Cold work tools and dies for blanking, trimming, chipping and shearing
Can IS 1570 (Part 6) T30Ni10Cr3Mo6 Be Substituted With IS 3748 T40Ni6Cr4Mo3?
IS 1570 (Part 6) T30Ni10Cr3Mo6 and IS 3748 T40Ni6Cr4Mo3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 1570 (Part 6) T30Ni10Cr3Mo6
0 active listings and RFQs →
IS 3748 T40Ni6Cr4Mo3
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 6) T30Ni10Cr3Mo6 and IS 3748 T40Ni6Cr4Mo3?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 1570 (Part 6) T30Ni10Cr3Mo6 be substituted with IS 3748 T40Ni6Cr4Mo3?
IS 1570 (Part 6) T30Ni10Cr3Mo6 and IS 3748 T40Ni6Cr4Mo3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.