Post Stock Login Register

IS 1570 (Part 6) T40Ni14 vs IS 1570 (Part 6) 60T6

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 6) T40Ni14 (IS 1570 (Part 6):1996) and IS 1570 (Part 6) 60T6 (IS 1570 (Part 6):1996) are both steel grades. Both fall under the Tool & Die Steels category. IS 1570 (Part 6) T40Ni14 is defined under Bureau of Indian Standards (IS), originating from India, while IS 1570 (Part 6) 60T6 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 1570 (Part 6) T40Ni14 vs IS 1570 (Part 6) 60T6 is a 78.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With IS 1570 (Part 6) T40Ni14:
EN ISO 683-17 100Cr6 GOST 5950 3H2W8F DIN EN ISO 4957 1.2344 IS 1570 (Part 6) 118T3 EN ISO 4957 1.2316 DIN EN ISO 4957 1.2379 GOST 5950 4H5MFS GB/T 1299 4Cr5MoSiV1 IS 1570 (Part 6) 103T3 GB/T 1299 4Cr5MoSiV IS 1570 (Part 6) 133T3 GB/T 1299 3Cr2W8V
Match Breakdown
CHEMISTRY MATCH
78.9%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property IS 1570 (Part 6) T40Ni14 IS 1570 (Part 6) 60T6
Standard IS 1570 (Part 6):1996 IS 1570 (Part 6):1996
Category Tool & Die Steels Tool & Die Steels
C (%) 0.35-0.45 0.55-0.65
Si (%) 0.10-0.35 0.10-0.35
Mn (%) 0.50-0.80 0.50-0.80
Ni (%) 3.20-3.60 <=0.25
Cr (%) <=0.30 <=0.20
P (%) <=0.035 <=0.035
S (%) <=0.035 <=0.035
Cu (%) Not specified <=0.25
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Key Differences
Can IS 1570 (Part 6) T40Ni14 Be Substituted With IS 1570 (Part 6) 60T6?
IS 1570 (Part 6) T40Ni14 and IS 1570 (Part 6) 60T6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 1570 (Part 6) T40Ni14
0 active listings and RFQs →
IS 1570 (Part 6) 60T6
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 6) T40Ni14 and IS 1570 (Part 6) 60T6?
IS 1570 (Part 6) 60T6 specifies Cu which is not specified for IS 1570 (Part 6) T40Ni14.
Can IS 1570 (Part 6) T40Ni14 be substituted with IS 1570 (Part 6) 60T6?
IS 1570 (Part 6) T40Ni14 and IS 1570 (Part 6) 60T6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.