Post Stock Login Register

IS 1570 (Part 6) T45Cr5Si3 vs GB/T 1299 4Cr5MoSiV

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 6) T45Cr5Si3 (IS 1570 (Part 6):1996) and GB/T 1299 4Cr5MoSiV (GB/T 1299-2014) are both steel grades. Both fall under the Tool & Die Steels category. IS 1570 (Part 6) T45Cr5Si3 is defined under Bureau of Indian Standards (IS), originating from India, while GB/T 1299 4Cr5MoSiV is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, IS 1570 (Part 6) T45Cr5Si3 vs GB/T 1299 4Cr5MoSiV is a 64.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With IS 1570 (Part 6) T45Cr5Si3:
EN ISO 683-17 100Cr6 EN ISO 4957 1.2316 GOST 5950 3H2W8F GOST 5950 4H5MFS IS 1570 (Part 6) 103T3 IS 1570 (Part 6) 118T3 GB/T 1299 3Cr2W8V DIN EN ISO 4957 1.2379 IS 1570 (Part 6) 133T3 AISI 52100 DIN EN ISO 4957 1.2344 GB/T 1299 4Cr5MoSiV1
Match Breakdown
CHEMISTRY MATCH
64.1%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property IS 1570 (Part 6) T45Cr5Si3 GB/T 1299 4Cr5MoSiV
Standard IS 1570 (Part 6):1996 GB/T 1299-2014
Category Tool & Die Steels Tool & Die Steels
C (%) 0.40-0.50 0.32–0.45
Si (%) 0.80-1.10 0.80–1.20
Mn (%) 0.55-0.75 0.20–0.50
Cr (%) 1.20-1.60 4.75–5.50
P (%) <=0.035 Not specified
S (%) <=0.035 Not specified
Mo (%) Not specified 1.10–1.60
V (%) Not specified 0.30–0.60
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 6) T45Cr5Si3 GB/T 1299 4Cr5MoSiV
Hardness HRC (hardened) Not specified 40–54
Hardness HB (annealed) Not specified ≤235
Typical Applications
IS 1570 (Part 6) T45Cr5Si3
Not documented
GB/T 1299 4Cr5MoSiV
Die casting dies, extrusion tooling
Key Differences
Can IS 1570 (Part 6) T45Cr5Si3 Be Substituted With GB/T 1299 4Cr5MoSiV?
IS 1570 (Part 6) T45Cr5Si3 and GB/T 1299 4Cr5MoSiV share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
IS 1570 (Part 6) T45Cr5Si3
No active listings currently.
GB/T 1299 4Cr5MoSiV
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2500–2700 mm (98.43–106.3 in)
On M-EX Right Now
IS 1570 (Part 6) T45Cr5Si3
0 active listings and RFQs →
GB/T 1299 4Cr5MoSiV
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 6) T45Cr5Si3 and GB/T 1299 4Cr5MoSiV?
IS 1570 (Part 6) T45Cr5Si3 specifies P, S which are not specified for GB/T 1299 4Cr5MoSiV. GB/T 1299 4Cr5MoSiV specifies Mo, V which are not specified for IS 1570 (Part 6) T45Cr5Si3.
Can IS 1570 (Part 6) T45Cr5Si3 be substituted with GB/T 1299 4Cr5MoSiV?
IS 1570 (Part 6) T45Cr5Si3 and GB/T 1299 4Cr5MoSiV share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.