Post Stock Login Register

IS 1570 (Part 6) T60Ni5 vs IS 1570 (Part 6) T55Ni6Cr3

Close Alternative — 81.5% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 6) T60Ni5 (IS 1570 (Part 6):1996) and IS 1570 (Part 6) T55Ni6Cr3 (IS 1570 (Part 6):1996) are both steel grades. Both fall under the Tool & Die Steels category. IS 1570 (Part 6) T60Ni5 is defined under Bureau of Indian Standards (IS), originating from India, while IS 1570 (Part 6) T55Ni6Cr3 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 1570 (Part 6) T60Ni5 vs IS 1570 (Part 6) T55Ni6Cr3 is a 81.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 81.5%.

Frequently Compared With IS 1570 (Part 6) T60Ni5:
EN ISO 683-17 100Cr6 GOST 5950 3H2W8F GOST 5950 4H5MFS1 EN ISO 4957 1.2316 IS 1570 (Part 6) 103T3 IS 1570 (Part 6) 118T3 IS 1570 (Part 6) 133T3 GB/T 1299 3Cr2W8V DIN EN ISO 4957 1.2344 GB/T 1299 4Cr5MoSiV GB/T 1299 4Cr5MoSiV1 DIN EN ISO 4957 1.2379
Match Breakdown
CHEMISTRY MATCH
81.5%
MECHANICAL MATCH
No shared data
OVERALL
81.5%
Specifications
Property IS 1570 (Part 6) T60Ni5 IS 1570 (Part 6) T55Ni6Cr3
Standard IS 1570 (Part 6):1996 IS 1570 (Part 6):1996
Category Tool & Die Steels Tool & Die Steels
C (%) 0.55-0.65 0.50-0.60
Si (%) 0.10-0.35 0.10-0.35
Mn (%) 0.50-0.80 0.50-0.80
Ni (%) 1.00-1.50 1.25-1.65
Cr (%) <=0.30 0.50-0.80
P (%) <=0.035 <=0.035
S (%) <=0.035 <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Can IS 1570 (Part 6) T60Ni5 Be Substituted With IS 1570 (Part 6) T55Ni6Cr3?
IS 1570 (Part 6) T60Ni5 and IS 1570 (Part 6) T55Ni6Cr3 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
IS 1570 (Part 6) T60Ni5
0 active listings and RFQs →
IS 1570 (Part 6) T55Ni6Cr3
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 6) T60Ni5 and IS 1570 (Part 6) T55Ni6Cr3?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 1570 (Part 6) T60Ni5 be substituted with IS 1570 (Part 6) T55Ni6Cr3?
IS 1570 (Part 6) T60Ni5 and IS 1570 (Part 6) T55Ni6Cr3 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.