Post Stock Login Register

IS 1570 (Part 6) XT35Cr5MoW1V3 vs IS 3748 T105W6CrV2

Related Material — 60.8% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 6) XT35Cr5MoW1V3 (IS 1570 (Part 6):1996) and IS 3748 T105W6CrV2 (IS 3748:1990) are both steel grades. Both fall under the Tool & Die Steels category. IS 1570 (Part 6) XT35Cr5MoW1V3 is defined under Bureau of Indian Standards (IS), originating from India, while IS 3748 T105W6CrV2 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 1570 (Part 6) XT35Cr5MoW1V3 vs IS 3748 T105W6CrV2 is a 60.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 60.8%.

Frequently Compared With IS 1570 (Part 6) XT35Cr5MoW1V3:
DIN EN ISO 4957 1.2379 EN ISO 683-17 100Cr6 GB/T 1299 3Cr2W8V GB/T 1299 4Cr5MoSiV IS 1570 (Part 6) 118T3 IS 1570 (Part 6) 133T3 GB/T 1299 4Cr5MoSiV1 GOST 5950 4H5MFS1 EN ISO 4957 1.2316 IS 1570 (Part 6) 103T3 GOST 5950 3H2W8F GOST 5950 4H5MFS
Match Breakdown
CHEMISTRY MATCH
60.8%
MECHANICAL MATCH
No shared data
OVERALL
60.8%
Specifications
Property IS 1570 (Part 6) XT35Cr5MoW1V3 IS 3748 T105W6CrV2
Standard IS 1570 (Part 6):1996 IS 3748:1990
Category Tool & Die Steels Tool & Die Steels
C (%) 0.30-0.40 0.90-1.20
Si (%) 0.80-1.20 0.10-0.35
Mn (%) 0.25-0.50 <=0.40
Cr (%) 4.75-5.50 0.40-0.80
Mo (%) 1.20-1.60 <=0.25
V (%) 0.20-0.40 0.20-0.30
W (%) 1.20-1.60 1.25-1.75
P (%) <=0.035 <=0.035
S (%) <=0.035 <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 6) XT35Cr5MoW1V3 IS 3748 T105W6CrV2
Hardness Not specified <=230 HB
Condition Not specified Annealed (maximum Brinell hardness)
Typical Applications
IS 1570 (Part 6) XT35Cr5MoW1V3
Not documented
IS 3748 T105W6CrV2
Cold work tools and dies for blanking, trimming, chipping and shearing
Can IS 1570 (Part 6) XT35Cr5MoW1V3 Be Substituted With IS 3748 T105W6CrV2?
IS 1570 (Part 6) XT35Cr5MoW1V3 and IS 3748 T105W6CrV2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 1570 (Part 6) XT35Cr5MoW1V3
0 active listings and RFQs →
IS 3748 T105W6CrV2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 6) XT35Cr5MoW1V3 and IS 3748 T105W6CrV2?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 1570 (Part 6) XT35Cr5MoW1V3 be substituted with IS 3748 T105W6CrV2?
IS 1570 (Part 6) XT35Cr5MoW1V3 and IS 3748 T105W6CrV2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.