Post Stock Login Register

IS 1570 (Part 7) 10Cr36Mo10H vs IS 1570 (Part 7) 10Mo6H

Minimal Match — 53.5% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 7) 10Cr36Mo10H (IS 1570 (Part 7):1992) and IS 1570 (Part 7) 10Mo6H (IS 1570 (Part 7):1992) are both steel grades. Both fall under the Alloy Steel category. IS 1570 (Part 7) 10Cr36Mo10H is typically used for boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature, while IS 1570 (Part 7) 10Mo6H is commonly used for boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature. IS 1570 (Part 7) 10Cr36Mo10H is defined under Bureau of Indian Standards (IS), originating from India, while IS 1570 (Part 7) 10Mo6H is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 1570 (Part 7) 10Cr36Mo10H vs IS 1570 (Part 7) 10Mo6H is a 80.2% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 53.5%.

Frequently Compared With IS 1570 (Part 7) 10Cr36Mo10H:
IS 1570 (Part 4) 103Cr6 IS 4367 07Cr4Mo6 IS 1570 (Part 7) 12Cr9Mo10H IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 7) 12Cr4Mo5H IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 105Cr5 IS 4367 10Cr9Mo10 IS 1570 (Part 4) 10Mo6 IS 1570 (Part 4) 10Cr20Mo6 GB/T 3077 12Cr2Ni4A IS 1570 (Part 7) 12Cr2Mo5V2H
Match Breakdown
CHEMISTRY MATCH
80.2%
MECHANICAL MATCH
0%
OVERALL
53.5%
Specifications
Property IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 7) 10Mo6H
Standard IS 1570 (Part 7):1992 IS 1570 (Part 7):1992
Category Alloy Steel Alloy Steel
C (%) <=0.15 <=0.15
Si (%) 0.25-1.0 0.50-1.00
Mn (%) 0.30-0.60 0.30-0.60
P (%) <=0.040 <=0.030
S (%) <=0.030 <=0.030
Cr (%) 8.00-10.00 1.00-1.50
Mo (%) 0.90-1.10 0.45-0.60
Al (metallic) (%) <=0.02 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 7) 10Mo6H
Tensile Strength 410-560 MPa >=415 MPa
Yield Strength >=135 MPa (0.2 % proof stress) >=205 MPa (0.2 % proof stress)
Elongation >=20% >=30%
Condition Pipes, A, thickness - (first row of Table 3) Tubes, N+T, thickness - (first row of Table 3)
Typical Applications
IS 1570 (Part 7) 10Cr36Mo10H
Boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature
IS 1570 (Part 7) 10Mo6H
Boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature
Key Differences
Can IS 1570 (Part 7) 10Cr36Mo10H Be Substituted With IS 1570 (Part 7) 10Mo6H?
IS 1570 (Part 7) 10Cr36Mo10H and IS 1570 (Part 7) 10Mo6H share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 1570 (Part 7) 10Cr36Mo10H
0 active listings and RFQs →
IS 1570 (Part 7) 10Mo6H
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 7) 10Cr36Mo10H and IS 1570 (Part 7) 10Mo6H?
IS 1570 (Part 7) 10Cr36Mo10H specifies Al (metallic) which is not specified for IS 1570 (Part 7) 10Mo6H.
Can IS 1570 (Part 7) 10Cr36Mo10H be substituted with IS 1570 (Part 7) 10Mo6H?
IS 1570 (Part 7) 10Cr36Mo10H and IS 1570 (Part 7) 10Mo6H share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.