Minimal Match — 53.4% match
based on chemical composition and mechanical property overlap.
IS 1570 C30 (IS 1570:1961) and BS 970 (Part 1) 055M15 (BS 970 (Part 1):1991) are both steel grades.
Both fall under the Carbon Steel category.
IS 1570 C30 is typically used for axles, shafts, gears, connecting rods, machine parts, forgings, while BS 970 (Part 1) 055M15 is commonly used for as-rolled, or as-rolled and softened, steel (section two).
IS 1570 C30 is defined under Bureau of Indian Standards (IS), originating from India, while BS 970 (Part 1) 055M15 is defined under British Standards (BS), originating from United Kingdom.
As per chemical composition, IS 1570 C30 vs BS 970 (Part 1) 055M15 is a 80.1% match.
As per mechanical properties, the match is 0%.
Combined, this makes them a minimal match overall at 53.4%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
As-rolled, or as-rolled and softened, steel (section two)
Key Differences
IS 1570 C30 specifies Si, S, P which are not specified for BS 970 (Part 1) 055M15.
Can IS 1570 C30 Be Substituted With BS 970 (Part 1) 055M15?
IS 1570 C30 and BS 970 (Part 1) 055M15 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between IS 1570 C30 and BS 970 (Part 1) 055M15?
IS 1570 C30 specifies Si, S, P which are not specified for BS 970 (Part 1) 055M15.
Can IS 1570 C30 be substituted with BS 970 (Part 1) 055M15?
IS 1570 C30 and BS 970 (Part 1) 055M15 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.