Post Stock Login Register

IS 2062 (Part 1) E235A vs CSA G40.21 300W

Related Material — 61.9% match based on chemical composition and mechanical property overlap.

IS 2062 (Part 1) E235A (IS 2062 (Part 1):2025) and CSA G40.21 300W (CSA G40.21-13 (R2023)) are both steel grades. Both fall under the Structural Steel category. IS 2062 (Part 1) E235A is typically used for structural work: welded, bolted and riveted structures and general engineering purposes, while CSA G40.21 300W is commonly used for structural fabrication,bridges,buildings,machinery frames,general construction,welded structures. IS 2062 (Part 1) E235A is defined under Bureau of Indian Standards (IS), originating from India, while CSA G40.21 300W is defined under Canadian Standards Association (CSA), originating from Canada.

As per chemical composition, IS 2062 (Part 1) E235A vs CSA G40.21 300W is a 92.9% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 61.9%.

Frequently Compared With IS 2062 (Part 1) E235A:
IS 2062 (Part 1) E235B0 IS 2062 (Part 1) E235C IS 2062 (Part 1) E235BR CSA G40.21 400W CSA G40.21 260W CSA G40.21 400A CSA G40.21 480W ASTM A1008 SS Grade 50 AS/NZS 3679.1 300 CSA G40.21 350W GOST 19281 09G2S AS/NZS 3679.1 350
Match Breakdown
CHEMISTRY MATCH
92.9%
MECHANICAL MATCH
0%
OVERALL
61.9%
Specifications
Property IS 2062 (Part 1) E235A CSA G40.21 300W
Standard IS 2062 (Part 1):2025 CSA G40.21-13 (R2023)
Category Structural Steel Structural Steel
C (%) <=0.20 <=0.23
Mn (%) <=1.40 <=1.50
Si (%) <=0.40 Not specified
S (%) <=0.045 <=0.050
P (%) <=0.045 <=0.040
CEV (%) <=0.40 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 2062 (Part 1) E235A CSA G40.21 300W
Tensile Strength >=360 MPa 450-620 MPa
Yield Strength 235 MPa (<=16mm) / 225 MPa (16-40mm) / 215 MPa (40-100mm) / 195 MPa (>100mm) 300 MPa min
Elongation >=26% (<=40mm) / >=25% (40-63mm) / >=24% (63-100mm) / >=22% (>100mm) 20-23 %
Impact not required Not specified
Typical Applications
IS 2062 (Part 1) E235A
Structural work: welded, bolted and riveted structures and general engineering purposes
CSA G40.21 300W
structural fabrication,bridges,buildings,machinery frames,general construction,welded structures
Key Differences
Can IS 2062 (Part 1) E235A Be Substituted With CSA G40.21 300W?
IS 2062 (Part 1) E235A and CSA G40.21 300W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
IS 2062 (Part 1) E235A
No active listings currently.
CSA G40.21 300W
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2700–2800 mm (106.3–110.24 in)
On M-EX Right Now
IS 2062 (Part 1) E235A
0 active listings and RFQs →
CSA G40.21 300W
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 2062 (Part 1) E235A and CSA G40.21 300W?
IS 2062 (Part 1) E235A specifies Si, CEV which are not specified for CSA G40.21 300W.
Can IS 2062 (Part 1) E235A be substituted with CSA G40.21 300W?
IS 2062 (Part 1) E235A and CSA G40.21 300W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.