Post Stock Login Register

IS 2062 (Part 1) E250BR vs IS 2062 (Part 1) E275A

Strong Match — 88.6% match based on chemical composition and mechanical property overlap.

IS 2062 (Part 1) E250BR (IS 2062 (Part 1):2025) and IS 2062 (Part 1) E275A (IS 2062 (Part 1):2025) are both steel grades. Both fall under the Structural Steel category. IS 2062 (Part 1) E250BR is typically used for structural work: welded, bolted and riveted structures and general engineering purposes, while IS 2062 (Part 1) E275A is commonly used for structural work: welded, bolted and riveted structures and general engineering purposes. IS 2062 (Part 1) E250BR is defined under Bureau of Indian Standards (IS), originating from India, while IS 2062 (Part 1) E275A is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 2062 (Part 1) E250BR vs IS 2062 (Part 1) E275A is a 99.6% match. As per mechanical properties, the match is 66.7%. Combined, this makes them a strong match overall at 88.6%.

Frequently Compared With IS 2062 (Part 1) E250BR:
IS 2062 (Part 1) E250A GOST 19281 09G2S IS 2062 (Part 1) E250B0 CSA G40.21 300W AS/NZS 3679.1 350 CSA G40.21 400A CSA G40.21 400W CSA G40.21 260W AS/NZS 3679.1 300 CSA G40.21 350W CSA G40.21 480W ASTM A1008 SS Grade 50
Match Breakdown
CHEMISTRY MATCH
99.6%
MECHANICAL MATCH
66.7%
OVERALL
88.6%
Specifications
Property IS 2062 (Part 1) E250BR IS 2062 (Part 1) E275A
Standard IS 2062 (Part 1):2025 IS 2062 (Part 1):2025
Category Structural Steel Structural Steel
C (%) <=0.22 <=0.23
Mn (%) <=1.50 <=1.50
Si (%) <=0.40 <=0.40
S (%) <=0.045 <=0.045
P (%) <=0.045 <=0.045
CEV (%) <=0.41 <=0.43
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 2062 (Part 1) E250BR IS 2062 (Part 1) E275A
Tensile Strength >=410 MPa >=430 MPa
Yield Strength 250 MPa (<=16mm) / 240 MPa (16-40mm) / 230 MPa (40-100mm) / 210 MPa (>100mm) 275 MPa (<=16mm) / 265 MPa (16-40mm) / 255 MPa (40-100mm) / 225 MPa (>100mm)
Elongation >=23% (<=40mm) / >=22% (40-63mm) / >=21% (63-100mm) / >=21% (>100mm) >=23% (<=40mm) / >=22% (40-63mm) / >=21% (63-100mm) / >=19% (>100mm)
Impact Energy >=27 J at room temperature (optional) Not specified
Impact Not specified not required
Typical Applications
IS 2062 (Part 1) E250BR
Structural work: welded, bolted and riveted structures and general engineering purposes
IS 2062 (Part 1) E275A
Structural work: welded, bolted and riveted structures and general engineering purposes
Can IS 2062 (Part 1) E250BR Be Substituted With IS 2062 (Part 1) E275A?
IS 2062 (Part 1) E250BR and IS 2062 (Part 1) E275A overlap closely enough on chemistry and mechanical properties that IS 2062 (Part 1) E275A is often considered as a substitute for IS 2062 (Part 1) E250BR in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 2062 (Part 1) E250BR
0 active listings and RFQs →
IS 2062 (Part 1) E275A
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 2062 (Part 1) E250BR and IS 2062 (Part 1) E275A?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 2062 (Part 1) E250BR be substituted with IS 2062 (Part 1) E275A?
IS 2062 (Part 1) E250BR and IS 2062 (Part 1) E275A overlap closely enough on chemistry and mechanical properties that IS 2062 (Part 1) E275A is often considered as a substitute for IS 2062 (Part 1) E250BR in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.