Post Stock Login Register

IS 2062 (Part 1) E410B0 vs IS 2062 (Part 1) E300B0

Strong Match — 88.5% match based on chemical composition and mechanical property overlap.

IS 2062 (Part 1) E410B0 (IS 2062 (Part 1):2025) and IS 2062 (Part 1) E300B0 (IS 2062 (Part 1):2025) are both steel grades. Both fall under the Structural Steel category. IS 2062 (Part 1) E410B0 is typically used for structural work: welded, bolted and riveted structures and general engineering purposes, while IS 2062 (Part 1) E300B0 is commonly used for structural work: welded, bolted and riveted structures and general engineering purposes. IS 2062 (Part 1) E410B0 is defined under Bureau of Indian Standards (IS), originating from India, while IS 2062 (Part 1) E300B0 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 2062 (Part 1) E410B0 vs IS 2062 (Part 1) E300B0 is a 99.5% match. As per mechanical properties, the match is 66.7%. Combined, this makes them a strong match overall at 88.5%.

Frequently Compared With IS 2062 (Part 1) E410B0:
CSA G40.21 350W ASTM A1008 SS Grade 80 GOST 19281 09G2S AS/NZS 3679.1 300 CSA G40.21 300W CSA G40.21 400A CSA G40.21 480W ASTM A1008 SS Grade 50 CSA G40.21 260W AS/NZS 3679.1 350 CSA G40.21 400W ASTM A283C
Match Breakdown
CHEMISTRY MATCH
99.5%
MECHANICAL MATCH
66.7%
OVERALL
88.5%
Specifications
Property IS 2062 (Part 1) E410B0 IS 2062 (Part 1) E300B0
Standard IS 2062 (Part 1):2025 IS 2062 (Part 1):2025
Category Structural Steel Structural Steel
C (%) <=0.20 <=0.20
Mn (%) <=1.65 <=1.50
Si (%) <=0.45 <=0.45
S (%) <=0.045 <=0.045
P (%) <=0.045 <=0.045
CEV (%) <=0.50 <=0.44
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 2062 (Part 1) E410B0 IS 2062 (Part 1) E300B0
Tensile Strength >=540 MPa >=440 MPa
Yield Strength 410 MPa (<=16mm) / 390 MPa (16-40mm) / 380 MPa (40-100mm) / 350 MPa (>100mm) 300 MPa (<=16mm) / 290 MPa (16-40mm) / 280 MPa (40-100mm) / 250 MPa (>100mm)
Elongation >=20% (<=40mm) / >=19% (40-63mm) / >=18% (63-100mm) / >=18% (>100mm) >=22% (<=40mm) / >=20% (40-63mm) / >=19% (63-100mm) / >=19% (>100mm)
Impact Energy >=25 J at 0°C >=27 J at 0°C
Typical Applications
IS 2062 (Part 1) E410B0
Structural work: welded, bolted and riveted structures and general engineering purposes
IS 2062 (Part 1) E300B0
Structural work: welded, bolted and riveted structures and general engineering purposes
Can IS 2062 (Part 1) E410B0 Be Substituted With IS 2062 (Part 1) E300B0?
IS 2062 (Part 1) E410B0 and IS 2062 (Part 1) E300B0 overlap closely enough on chemistry and mechanical properties that IS 2062 (Part 1) E300B0 is often considered as a substitute for IS 2062 (Part 1) E410B0 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 2062 (Part 1) E410B0
0 active listings and RFQs →
IS 2062 (Part 1) E300B0
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 2062 (Part 1) E410B0 and IS 2062 (Part 1) E300B0?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 2062 (Part 1) E410B0 be substituted with IS 2062 (Part 1) E300B0?
IS 2062 (Part 1) E410B0 and IS 2062 (Part 1) E300B0 overlap closely enough on chemistry and mechanical properties that IS 2062 (Part 1) E300B0 is often considered as a substitute for IS 2062 (Part 1) E410B0 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.