Post Stock Login Register

IS 2062 (Part 1) E500BR vs IS 2062 (Part 1) E410A

Strong Match — 87.1% match based on chemical composition and mechanical property overlap.

IS 2062 (Part 1) E500BR (IS 2062 (Part 1):2025) and IS 2062 (Part 1) E410A (IS 2062 (Part 1):2025) are both steel grades. Both fall under the Structural Steel category. IS 2062 (Part 1) E500BR is typically used for structural work: welded, bolted and riveted structures and general engineering purposes, while IS 2062 (Part 1) E410A is commonly used for structural work: welded, bolted and riveted structures and general engineering purposes. IS 2062 (Part 1) E500BR is defined under Bureau of Indian Standards (IS), originating from India, while IS 2062 (Part 1) E410A is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 2062 (Part 1) E500BR vs IS 2062 (Part 1) E410A is a 97.4% match. As per mechanical properties, the match is 66.7%. Combined, this makes them a strong match overall at 87.1%.

Frequently Compared With IS 2062 (Part 1) E500BR:
CSA G40.21 400A CSA G40.21 480W ASTM A283C ASTM A572 Gr.65 GOST 19281 09G2S CSA G40.21 260W AS/NZS 3679.1 300 CSA G40.21 300W AS/NZS 3679.1 350 CSA G40.21 350W CSA G40.21 400W ASTM A1008 SS Grade 50
Match Breakdown
CHEMISTRY MATCH
97.4%
MECHANICAL MATCH
66.7%
OVERALL
87.1%
Specifications
Property IS 2062 (Part 1) E500BR IS 2062 (Part 1) E410A
Standard IS 2062 (Part 1):2025 IS 2062 (Part 1):2025
Category Structural Steel Structural Steel
C (%) <=0.22 <=0.22
Mn (%) <=1.70 <=1.65
Si (%) <=0.50 <=0.45
S (%) <=0.030 <=0.045
P (%) <=0.030 <=0.045
CEV (%) <=0.53 <=0.50
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 2062 (Part 1) E500BR IS 2062 (Part 1) E410A
Tensile Strength >=580 MPa >=540 MPa
Yield Strength 500 MPa (<=16mm) / 480 MPa (16-40mm) / 470 MPa (40-100mm) / 450 MPa (>100mm) 410 MPa (<=16mm) / 390 MPa (16-40mm) / 380 MPa (40-100mm) / 350 MPa (>100mm)
Elongation >=15% (<=40mm) / >=15% (40-63mm) / >=15% (63-100mm) / >=15% (>100mm) >=20% (<=40mm) / >=19% (40-63mm) / >=18% (63-100mm) / >=18% (>100mm)
Impact Energy >=15 J at room temperature (optional) Not specified
Impact Not specified not required
Typical Applications
IS 2062 (Part 1) E500BR
Structural work: welded, bolted and riveted structures and general engineering purposes
IS 2062 (Part 1) E410A
Structural work: welded, bolted and riveted structures and general engineering purposes
Can IS 2062 (Part 1) E500BR Be Substituted With IS 2062 (Part 1) E410A?
IS 2062 (Part 1) E500BR and IS 2062 (Part 1) E410A overlap closely enough on chemistry and mechanical properties that IS 2062 (Part 1) E410A is often considered as a substitute for IS 2062 (Part 1) E500BR in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 2062 (Part 1) E500BR
0 active listings and RFQs →
IS 2062 (Part 1) E410A
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 2062 (Part 1) E500BR and IS 2062 (Part 1) E410A?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 2062 (Part 1) E500BR be substituted with IS 2062 (Part 1) E410A?
IS 2062 (Part 1) E500BR and IS 2062 (Part 1) E410A overlap closely enough on chemistry and mechanical properties that IS 2062 (Part 1) E410A is often considered as a substitute for IS 2062 (Part 1) E500BR in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.