Post Stock Login Register

IS 2062 (Part 1) E600BR vs IS 2062 E600A

Strong Match — 87% match based on chemical composition and mechanical property overlap.

IS 2062 (Part 1) E600BR (IS 2062 (Part 1):2025) and IS 2062 E600A (IS 2062:2011) are both steel grades. Both fall under the Structural Steel category. IS 2062 (Part 1) E600BR is typically used for structural work: welded, bolted and riveted structures and general engineering purposes, while IS 2062 E600A is commonly used for structural work: welded, bolted and riveted structures and general engineering purposes. IS 2062 (Part 1) E600BR is defined under Bureau of Indian Standards (IS), originating from India, while IS 2062 E600A is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 2062 (Part 1) E600BR vs IS 2062 E600A is a 100% match. As per mechanical properties, the match is 61.1%. Combined, this makes them a strong match overall at 87%.

Frequently Compared With IS 2062 (Part 1) E600BR:
ASTM A1008 SS Grade 80 ASTM A572 Gr.65 CSA G40.21 300W AS/NZS 3679.1 300 CSA G40.21 400A CSA G40.21 400W ASTM A283C GOST 19281 09G2S AS/NZS 3679.1 350 CSA G40.21 350W ASTM A1008 SS Grade 50 CSA G40.21 260W
Match Breakdown
CHEMISTRY MATCH
100%
MECHANICAL MATCH
61.1%
OVERALL
87%
Specifications
Property IS 2062 (Part 1) E600BR IS 2062 E600A
Standard IS 2062 (Part 1):2025 IS 2062:2011
Category Structural Steel Structural Steel
C (%) <=0.22 <=0.22
Mn (%) <=1.70 <=1.70
Si (%) <=0.50 <=0.50
S (%) <=0.020 <=0.020
P (%) <=0.025 <=0.025
CEV (%) <=0.54 <=0.54
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 2062 (Part 1) E600BR IS 2062 E600A
Tensile Strength >=700 MPa >=730 MPa
Yield Strength 600 MPa (<=16mm) / 580 MPa (16-40mm) / 570 MPa (40-100mm) 600 MPa (<=20mm) / 580 MPa (20-40mm) / 570 MPa (>40mm)
Elongation >=12% (<=40mm) >=12%
Impact Energy >=15 J at room temperature (optional) Not specified
Impact Not specified not required
Typical Applications
IS 2062 (Part 1) E600BR
Structural work: welded, bolted and riveted structures and general engineering purposes
IS 2062 E600A
Structural work: welded, bolted and riveted structures and general engineering purposes
Can IS 2062 (Part 1) E600BR Be Substituted With IS 2062 E600A?
IS 2062 (Part 1) E600BR and IS 2062 E600A overlap closely enough on chemistry and mechanical properties that IS 2062 E600A is often considered as a substitute for IS 2062 (Part 1) E600BR in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 2062 (Part 1) E600BR
0 active listings and RFQs →
IS 2062 E600A
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 2062 (Part 1) E600BR and IS 2062 E600A?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 2062 (Part 1) E600BR be substituted with IS 2062 E600A?
IS 2062 (Part 1) E600BR and IS 2062 E600A overlap closely enough on chemistry and mechanical properties that IS 2062 E600A is often considered as a substitute for IS 2062 (Part 1) E600BR in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.