Post Stock Login Register

IS 2062 E250A vs IS 2062 E250A

Strong Match — 100% match based on chemical composition and mechanical property overlap.

IS 2062 E250A (IS 2062:2006) and IS 2062 E250A (IS 2062:2009) are both steel grades. Both fall under the Structural Steel category. IS 2062 E250A is typically used for structural work: welded, bolted and riveted structures and general engineering purposes, while IS 2062 E250A is commonly used for structural work: welded, bolted and riveted structures and general engineering purposes. IS 2062 E250A is defined under Bureau of Indian Standards (IS), originating from India, while IS 2062 E250A is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 2062 E250A vs IS 2062 E250A is a 100% match. As per mechanical properties, the match is 100%. Combined, this makes them a strong match overall at 100%.

Frequently Compared With IS 2062 E250A:
IS 2062 E165 IS 2062 E250B0 IS 2062 E250B IS 2062 E250B0 IS 2062 E250A IS 2062 E250BR GOST 19281 09G2S AS/NZS 3679.1 300 CSA G40.21 300W CSA G40.21 350W CSA G40.21 260W AS/NZS 3679.1 350
Match Breakdown
CHEMISTRY MATCH
100%
MECHANICAL MATCH
100%
OVERALL
100%
Specifications
Property IS 2062 E250A IS 2062 E250A
Standard IS 2062:2006 IS 2062:2009
Category Structural Steel Structural Steel
C (%) <=0.23 <=0.23
Mn (%) <=1.50 <=1.50
S (%) <=0.045 <=0.045
P (%) <=0.045 <=0.045
Si (%) <=0.40 <=0.40
CEV (%) <=0.42 <=0.42
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 2062 E250A IS 2062 E250A
Tensile Strength >=410 MPa >=410 MPa
Yield Strength 250 MPa (<20mm) / 240 MPa (20-40mm) / 230 MPa (>40mm) 250 MPa (<20mm) / 240 MPa (20-40mm) / 230 MPa (>40mm)
Elongation >=23% >=23%
Impact not required not required
Typical Applications
IS 2062 E250A
Structural work: welded, bolted and riveted structures and general engineering purposes
IS 2062 E250A
Structural work: welded, bolted and riveted structures and general engineering purposes
Can IS 2062 E250A Be Substituted With IS 2062 E250A?
IS 2062 E250A and IS 2062 E250A overlap closely enough on chemistry and mechanical properties that IS 2062 E250A is often considered as a substitute for IS 2062 E250A in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 2062 E250A
0 active listings and RFQs →
IS 2062 E250A
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 2062 E250A and IS 2062 E250A?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 2062 E250A be substituted with IS 2062 E250A?
IS 2062 E250A and IS 2062 E250A overlap closely enough on chemistry and mechanical properties that IS 2062 E250A is often considered as a substitute for IS 2062 E250A in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.