Post Stock Login Register

IS 2062:2006 E250B Steel: Specifications & Listings

IS 2062:2006 E250B: E250B is grade E 250, quality B in IS 2062:2006 (Hot Rolled Low, Medium and High Tensile Structural Steel), which covers plates, strips, shapes, sections, flats and bars for structural work. Old designation Fe 410 W. This is the edition as first published in October 2006, before Amendment No. 1 (March 2009); impact test temperature is subject to agreement.

Category: Structural Steel
Grade Details
GradeIS 2062:2006 E250B
Standard IS 2062:2006
ApplicationsStructural work: welded, bolted and riveted structures and general engineering purposes
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
IS 2062 E250B0 IS 2062:2011 Strong Match
IS 2062 E250BR IS 2062:2011 Strong Match
IS 2062 E250BR IS 2062:2009 Strong Match
IS 2062 E250B0 IS 2062:2009 Strong Match
IS 2062 E250A IS 2062:2011 Strong Match
IS 2062 E250A IS 2062:2006 Strong Match
IS 2062 E250A IS 2062:2009 Strong Match
IS 2062 E250C IS 2062:2011 Strong Match
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Mn S P Si CEV
<=0.22 <=1.50 <=0.045 <=0.045 <=0.40 <=0.41
Mechanical Properties
Tensile Strength >=410 MPa
Yield Strength 250 MPa (<20mm) / 240 MPa (20-40mm) / 230 MPa (>40mm)
Elongation >=23%
Impact Energy >=27 J at room temperature (25 +/- 2°C)

More data from IS 2062:2006

From the standard
Yield stress by thickness 3 thickness ranges
Thickness (mm)Yield stress ReH, min (MPa)
Under 20250
20 to 40240
Over 40230
Source: IS 2062:2006 as first published, Table 2
Bend test t is the thickness
Internal bend diameter, thickness up to 25 mm
2t
Internal bend diameter, thickness over 25 mm
3t
The table heading gives the bend diameter as a minimum. t is the thickness of the test piece.
Source: IS 2062:2006 as first published, Table 2
Impact test and deoxidation E 250, quality B
Old designation
Fe 410 W
Impact test
Required
Minimum Charpy impact energy at room temperature (25 +/- 2°C)
27 J
Mode of deoxidation
Killed
Source: IS 2062:2006 as first published, Tables 1 and 2
Other composition limits from the table notes
Nitrogen, maximum
0.012 percent (0.009 percent for micro-alloyed steel)
Micro-alloying elements (Nb, V, Ti, B), total maximum
0.25 percent
Copper-bearing quality
Cu 0.20 to 0.35 percent by agreement, suffix Cu (for example E 250 Cu); product analysis 0.17 to 0.38 percent
Carbon equivalent CE = C + Mn/6 + (Cr+Mo+V)/5 + (Ni+Cu)/15, from the ladle analysis.
Source: IS 2062:2006 as first published, Table 1 notes

Active IS 2062:2006 E250B Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active IS 2062:2006 E250B listings at this time.

Register for Alerts

Buyer RFQs for IS 2062:2006 E250B

+ Post an RFQ for this grade

No open buyer requirements for IS 2062:2006 E250B at this time.

Register for Alerts