Post Stock Login Register

IS 2062 E650BR vs AS/NZS 3679.1 300

Related Material — 64.8% match based on chemical composition and mechanical property overlap.

IS 2062 E650BR (IS 2062:2009) and AS/NZS 3679.1 300 (AS/NZS 3679.1:2016) are both steel grades. Both fall under the Structural Steel category. IS 2062 E650BR is typically used for structural work: welded, bolted and riveted structures and general engineering purposes, while AS/NZS 3679.1 300 is commonly used for hot-rolled structural bars and sections for general structural framing. IS 2062 E650BR is defined under Bureau of Indian Standards (IS), originating from India, while AS/NZS 3679.1 300 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand.

As per chemical composition, IS 2062 E650BR vs AS/NZS 3679.1 300 is a 97.1% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 64.8%.

Frequently Compared With IS 2062 E650BR:
CSA G40.21 260W CSA G40.21 400W CSA G40.21 300W CSA G40.21 400A ASTM A1008 SS Grade 80 GOST 19281 09G2S CSA G40.21 350W CSA G40.21 480W ASTM A1008 SS Grade 50 ASTM A283C AS/NZS 3679.1 350 ASTM A572 Gr.65
Match Breakdown
CHEMISTRY MATCH
97.1%
MECHANICAL MATCH
0%
OVERALL
64.8%
Specifications
Property IS 2062 E650BR AS/NZS 3679.1 300
Standard IS 2062:2009 AS/NZS 3679.1:2016
Category Structural Steel Structural Steel
C (%) <=0.22 <=0.22
Mn (%) <=1.70 <=1.70
S (%) <=0.015 <=0.040
P (%) <=0.025 <=0.040
Si (%) <=0.50 <=0.50
CEV (%) <=0.52 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 2062 E650BR AS/NZS 3679.1 300
Tensile Strength >=780 MPa 440-600 MPa
Yield Strength 650 MPa (<20mm) / 630 MPa (20-40mm) / 620 MPa (>40mm) 300 MPa min
Elongation >=12% 22% min
Impact Energy >=15 J at room temperature (25 +/- 2°C) (optional) Not specified
Typical Applications
IS 2062 E650BR
Structural work: welded, bolted and riveted structures and general engineering purposes
AS/NZS 3679.1 300
Hot-rolled structural bars and sections for general structural framing
Key Differences
Can IS 2062 E650BR Be Substituted With AS/NZS 3679.1 300?
IS 2062 E650BR and AS/NZS 3679.1 300 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
IS 2062 E650BR
No active listings currently.
AS/NZS 3679.1 300
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2700–2700 mm (106.3–106.3 in)
On M-EX Right Now
IS 2062 E650BR
0 active listings and RFQs →
AS/NZS 3679.1 300
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 2062 E650BR and AS/NZS 3679.1 300?
IS 2062 E650BR specifies CEV which is not specified for AS/NZS 3679.1 300.
Can IS 2062 E650BR be substituted with AS/NZS 3679.1 300?
IS 2062 E650BR and AS/NZS 3679.1 300 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.