Post Stock Login Register

IS 2062:2011 E250BR Steel: Specifications & Listings

IS 2062:2011 E250BR: E250BR is grade E 250, quality BR, in IS 2062:2011 (Hot Rolled Medium and High Tensile Structural Steel), which covers plates, strips, shapes, sections, flats and bars for structural work. The grade is named by its minimum yield stress.

Category: Structural Steel
Grade Details
GradeIS 2062:2011 E250BR
Standard IS 2062:2011
ApplicationsStructural work: welded, bolted and riveted structures and general engineering purposes
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
IS 2062 E250B0 IS 2062:2011 Strong Match
IS 2062 E250B IS 2062:2006 Strong Match
IS 2062 E250BR IS 2062:2009 Strong Match
IS 2062 E250B0 IS 2062:2009 Strong Match
IS 2062 E250A IS 2062:2011 Strong Match
IS 2062 E250A IS 2062:2006 Strong Match
IS 2062 E250A IS 2062:2009 Strong Match
IS 2062 E250C IS 2062:2011 Strong Match
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Mn Si S P CEV
<=0.22 <=1.50 <=0.40 <=0.045 <=0.045 <=0.41
Mechanical Properties
Tensile Strength >=410 MPa
Yield Strength 250 MPa (<=20mm) / 240 MPa (20-40mm) / 230 MPa (>40mm)
Elongation >=23%
Impact Energy >=27 J at room temperature (optional)

More data from IS 2062:2011

From the standard
Yield stress by thickness 3 thickness ranges
Thickness (mm)Yield stress ReH, min (MPa)
Under 20250
20 to 40240
Over 40230
For product thickness or diameter above 100 mm, a lower minimum tensile strength may be agreed between the purchaser and the manufacturer.
Source: IS 2062:2011 with Amendment 1, Table 2
Bend test t is the thickness
Internal bend diameter, maximum, thickness up to 25 mm
2t
Internal bend diameter, maximum, thickness over 25 mm
3t
Amendment 1 changes the heading from Min to Max. t is the thickness of the test piece.
Source: IS 2062:2011 with Amendment 1, Table 2, note 2
Impact test and deoxidation quality BR
Impact test
Optional; if required, at room temperature (25 +/- 2°C)
Minimum Charpy impact energy
27 J
Mode of deoxidation
Semi-killed or killed
Source: IS 2062:2011 with Amendment 1, Tables 1 and 2, clause 5

Active IS 2062:2011 E250BR Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active IS 2062:2011 E250BR listings at this time.

Register for Alerts

Buyer RFQs for IS 2062:2011 E250BR

+ Post an RFQ for this grade

No open buyer requirements for IS 2062:2011 E250BR at this time.

Register for Alerts